johnecon2001

I like your double baffle cutting technique.

Why did you order a Dual 1? You'll need to look at Kicker amps for that power now as most are stable at 2 ohms. Shame you didn't order Dual2, then you could take advantage of this --> http://www.soundsolutionsaudio.com/forum/i...c=20977&hl= You should email Fi and see if you can change.

Been here awhile lol

Sundown has two great amps right now for insanely low pricing. You could pre-order the SAE-1200D for $350, or order the now on sale SAZ-1500D for $425.

Sundown is having a sale on their SAZ-1500D's right now. $425. I'd swap that for the Rockford you have. Probably save a little.

Ebay. craigslist. etc. They're no longer made, so used is your only option.

The AQ amps have been blowing up left and right. Stay away.

Single Din or Double Din?

Without a model number, we can't do anything for you. I sincerely doubt it was anywhere near 2000w~ though.

I've never heard of that, nor has google... so I'd guess no. What's your amplifier budget like?

I believe they make Plate speakers that combine a 4"-5" mid and a tweeter. This would be much better than a 4x6.

My civic was always fine. But I never had any thing crazy in there.

IF you intend on getting your full 2500 watts out of it, a second battery is in order. 1/0awg from the front battery to the second battery. 1/0awg to a distro. 4awg to amp.

Good luck. I've been looking for that for forever. There isn't one.

You're confusing DCR readings with ohm load.

HDR looks good.

QFT.

You could measure your impedance rise and pray for the best.

You seem slightly confused on your goals. The BM's are shallow mount SQ subwoofers while the BL would be considered a Ground Pounder. Just stick with the BL if you have that much space available. Do a ported box and tune to around 35-37hz.

PERFECT THANKS! tha VGA inpyer should be blue on the tv right.... the female in the pic. yep, the VGA input is the blue one. You'll probably have to play around with your resolution settings on that output to match the TV.

http://www.partsexpress.com/pe/pshowdetl.c...tnumber=390-804

Its possible you can only run two of your outputs at the same time. Also, most generic VGA cables will be male to male. Shouldn't be too hard to find one that will be long enough. Check out www.monoprice.com for cheap, well built cables.

You only need one topic *merged*

Full tilt meaning what? What about idle output?

All depends on your skill as an installer.