johnecon2001

You could also look into the MaxxLink to signal strap those amps together.

I'd plan on that 8^3ft enclosure.

Mean green and Mechman

Because you can make a better sounding box on your own, for less money.

A loud demo car? Unless you plan on using that Deck active... for christs sake.. go with something else. You'll be using about 5% of that decks capacity if you use it in Passive mode.

You don't "need" 3kw at 2 ohms. You're choosing to run that much. In reality, the subs you choose can utilize far less.

You should be fine. Remember to add a little polyfill to change what the box sounds like.

I thought the 20.1 was still in production and the 40.1 was discontinued. So the Rebirth.... ehh.. I guess it could work for either amp.

I doubt this will happen, very much.

wow, three interchangeable ports? I'd look into 4 Aero ports and see if you can get what you want by plugging them.

The fuse doesn't have anything to do with your electrical problem.

New coils with a small spacer up front on Bilstien 5100 shocks. Add a Leaf in the rear, again with 5100's. Added a new Tom Woods one piece drive shaft. Supposed to be 3 inches taller at the suspension, but it is taller than that all around. Overall ride is better than stock. Woot!

What dimensions are you looking for exactly? Depth and cutout should be all you need to know. Cutout is the same as the other 15" subs with a 12 spoke basket. And I doubt the BL is deeper than the BTL, so there you have it.

What kind of space are you working with? You really haven't told us the pertinent information.

This isn't the place to advertise your business without the Site owners approval. And to the best of my knowledge.. you lack that approval.

40.1? Woot!

Not sure what this has to do with Sundown.. moved. Not all boxes are square, btw. What's wrong with a rectangle?

One post, is more than enough.

lol WinISD. Use Fi's recommended enclosures. They know better than winISD does. This has been gone over MANY times.

Talk about an installer dependent question... All up to you man.

User has been disabled. You may delete the PM's

Theres a box tool on this site? http://www.soundsolutionsaudio.com/home/index.php/boxtools

uhhh unless Thumpper built this.. this is in the wrong place. Moved.