ANeonRider

http://www.ubid.com/actn/opn/getpage.asp?AuctionId=10449522

I could probably use someone else's US address, then get them to forward it to me... hmmm Who is willing?

Dammit!!! Can't sign up if you are from outside the US.

Welcome to the good side!

hmm, ubid... need to spend some time on there.

Ok... In the process of building a new sub enclosure, fibreglass of course. And I am porting it (RL-p 12). Now, I do not want to use a slot port, what options do I have for nice flared ports? What dia should I go with, is 4" large enough? I saw a couple options on partsexpress, wondering if it is possible to use normal plumbing PVC instead of the supplied stuff so that I can get lengths longer than say 17"? I'll try to get pics up on the build, but, me being digicam poor, may not be able to get any up until it is completed (or I go through a complete film on the old-fashioned cam-era).

a single 3.5" or dual 2.5" is what I would use.

I would never use 1" ports... like trying to suck a jellybean through a straw. What subs?

Go nuts!

Use an RCA splitter (Y-Adapter) if you are running more than 2 channels. Some amps also have switches so that you can use the input from Channels 1/2 for Channels 3/4. http://www.cardomain.com/item/PHOA568XS

Just watch it take 2 weeks

Woot! I will have pics of the sticker as soon as they are on the ride. Thanks for doing all the leg work on this Steve, I am sure it was/is a huge pain in the ass.

WTF? Yes, that was a little over the top, if you feel you need to rant, leave it at Ca.com, not here.

I wouldn't even worry about it.

welcome!

Yep, only D2... so, two options, find a used one, and then another amp. Or buy two new ones, and a different amp.

Like dimensions, port length, etc. Look at flakko's thread for a good idea what you need... Until then, I assume you have a box with a hole in it.

Too small.... http://www.the12volt.com/info/recwirsz.asp Must be at least 2 ga.

My Brutus has a ground plane problem, and I can't fix it with the equipment I have (read:none). Where do you guys recommend? I am very picky about who works on my equipment, and am leary of the shops around here.

They charge $40CDN/gallon of poly resin at the local Marine store. I have a friend that sells it for $130/5 gallons. Just trying to see where the best deal is

Just checking pricing on various different places. What places do you guys use for your resin/matte/cloth?

x2

Sounds like a good plan... but where are the real numbers/design? I won't sign off on a plan until I know ALL of the variables.

Mono front stage... yuck. I'd list that as horrid

Will do that tomorrow.