ANeonRider

Reduce use... only thing that will help you any. One reason corn & other grains have skyrocketted in price is because of North America's push for ethanol production, which solves nothing & causes more problems.

Jmac, a house like that would cost $500,000-600,000 here, fack, hope you get it! Where on the island are you???

I use a vise & a screw driver to crimp, then the 150W soldering iron to solder it.

DeepSubBoy = village idiot.

Mind blowing.

Buys you a two bedroom condo here, maybe, just maybe a 750sq. ft. house. Market is higher there, so, what are you looking at?

Saturn is a GM product... Currently, yes In the past however they were entirely their own product... Since day one they have been owned by GM. But, they are run like Saab, seperately.

Saturn is a GM product... Yeeep, but some Saturn's have Honda drivetrains. Saturn has a weird operation under GM, which makes it almost like it is running as its own company.

My gf just bought a 92 SC with the 1.9 DOHC engine, 5 speed with only 133,000km on it for $2500 with $700 of winter tires/wheels included. I actually don't mind it at all, works great for what she needed. An economical car that gets her to work & back and the occasional trip to the lake.

Considering getting an iPOD, then using RockBox or whatever it is to play flacs with it.

I take it that would be oil producing countries by volume of export? Or is it by production? J Volume of Export

Nope, Dupicolor wheel paint. It's all in the prep & coat thickness. Steps 1. Washed & scrubbed the wheels with dish soap 2. Simple Green degreaser & washed clean 3. Sanded with red scotchbrite pad 4. Sanded with green scotchbrite pad 5. Simple green degreaser, wiped clean 6. Mineral spirits wipe, so ensure the surface is free of everything 7. Tape the wheel off 8. 2 light coats of colour (flat black in this case), followed by 1 heavy coat of colour & finished with 2 light coats. Wait 10min between coats. 9. Wait 45 min for base to cure 10. 2 light coats of clear, 1 heavy coat of clear, 2 light coats of clear. Wait 10 min between the coats. 11. Let sit for 24 hours in a dry & warm room with minimal dust to cure 12. Polish 13. Install

Gas just jumped to $5.14/gallon for 87 & $5.60/gallon for 92 here.

1. Canada 2. Mexico 3. Saudi Arabia 4. Venezuela 5. Nigeria 6. Angola 7. Iraq 8. Algeria 9. United Kingdom 10. Brazil Yet, our prices are still higher

Probably cracked one of those tiny bones in your foot. Been there, done that, couldn't walk on it for 3 weeks.

Already tinted on the back 3, front 2 are not legal, but I might tint them with 35% anyways. Ordered Tanabe NF210 lowering springs (1.3"f/1.1"r) yesterday to kill the wheel gap & I need to find a replacement for the stock muffler (corrosion) without adding any loudness (actually, quieter would be nice).

How about, use a driver that fits in your vehicle?? Or just go with one of them.

I'm going to say it didn't have anything to do with the material.

Typical. It is because your economy is stinking the big one right now & developing economic superpowers like China & India are competing with the US for oil reserves. And you pay the LOWEST prices for gasoline in the industrialized world.

Here it is. $4.91 for 87 $5.12 for Diesel $5.27 for 92 Good thing our dollar is at par with the US$ now compared to ~$0.60 in 2002, or we'd be in the $7-8 range. Ask Adrian what fuel prices are there. Time for Americans to use more appropriate vehicles for their use...

That router table makes me slightly nervous LOL

I'm an Sharp Aquos fan. Samsung is a close second.

Refinished the stock 17" wheels on my Spec V yesterday. Flat black basecoat & gloss clearcoat, looks like a semi gloss finish. Pictures might be up tonight.

ding ding ding.

behind a firewall?