dave_Edwards

well with TO3 output stages and 105degree capasitors---yes---you could say they sound good too

http://www.theautophile.com/products/SiteD...eDirectory.html

they are good prices---if you know some people

are you sure that what you sodered was the right problem?---take your DMM and see if the resistors are still good---should be in the milli ohm to low ohms of resistance. The power supply is sounding like it is going out to me though---it takes 6volts but not 12volts?That is a problem---is there a reson why you couldn't return it? check the power suppy with power applied for voltage---should be 12-14.2volts. I would have to look at it more to REALLY get a hold of the problem---post some pics!

all I will say is this----ALOT!

liquid rubbing alcohol is what I would use---use with q tips and cotton balls to dry it---do not get the internels too wet---dab and rub littly---should come off pretty easy. I is just burnt copper(used in lower class D amps) need anything else---just ask

http://www.the12volt.com/cgi-bin/quiz.asp here is my results http://www.the12volt.com/cgi-bin/quiz/quiza.pl put in Dave_Edwards for the screenename

am I Denim? Score for Dave Question 1 E divided by I, is correct! Resistance

http://arawndark.netfirms.com/ cool link I have to the internals of amplifers. Daddy likes!!!!

I got this from the12volt.com---hope it helps.

RTA for RTA scoring only---i have used them--hell i have one---but I never use it---a RTA is used to see when you need to bump up a certain frequency---I will NEVER tune to a flat RTA sheet---I did once---can you say flat and boring music?As humans we love peaks and valleys in our music. I LOVE the hell freezes over CD from the Eagles, "Hotel California" is THE BEST!Good call on that one

good ol false floor with a motorized amprack---the floor will be about 3 inches tal and it will be upside down with a panel over it(it will be vented though)on the left side of the inside of the cargo area will be the selinoid to lift the panel and lift the amp up(40lbs acctuator) it will sit at a 45degree angle for shows---the interior case will be the whole width of the Explorer and about 13 inches deep---it will have 4 fans moving as much air as possible----yeah I have thought this out.You should hear my new Brahma enclsoure idea

lol, ok I love my new banner---it is a work of art---Thank you million times over Denim you rock!

welcome Ace---Glad to have you here---if you need anything just ask.

seems like a perfect learning piece---if you know what is wrong---why pay someone else to do it----I say go for it and if you need any help I will be here.

Key Features Amplifier Type Multi Channels Bass Boost With Bass Boost Bridgable Not Bridgable Power Output RMS Power at 2 Ohms 50 W x 4 + 200 W x 1 RMS Power at 4 Ohms 25 W x 4 + 100 W x 1 Performance Bass Boost Frequency 40 Hz Dimensions Width 15.5 in. Depth 9.75 in. Height 2.1 in. Other Features Input Voltage 12.5 volt MOSFET amp Yes other than the size of the amp it is ok---I could think of a few other amps I would rather see you start with though. http://www.alpine-usa.com/html/D2_n_1_n_n.html the Alpine MRV-F450 has alot better control and can be had for about the same price. The active crossover network works great in the MRV-F450 also--yes it is only 12Dbs but for a 5 channel anything else is gonna cost you more. or another good amp http://www.arcaudio.com/arc/navigation/kar...ar4004prodp.htm this is a 4 channel but it is a GREAT "Starter amp" if you have alittle bit more money try the http://www.arcaudio.com/arc/navigation/cxl...xl5150prodp.htm it is a 5 channel Arc Amp and it is the top dog in 5 channels if you ask me---the best part is that you don't need a huge output of voltage from the HU to get the most from it---it maxs out @ 2.5volts(most aftermarket HU have 4 volt now a days) Then we have the personal favorite 5 channel http://incolor.inebraska.com/weisinator/co...s/pg-qx5005.htm the QX5005 from Phoenix Gold(got to love em)---for the $ i doubt you will find anything better. but these are a few of my favs and out of those----I persoanlly would take the PG or the Arc Audio CXL5150. Hope this helps,

as far as I know---there is a recone kit for any sub---but I would contact Infinity at 516-674-4INF and ask for customer support---ask them if they sell them to the public or will you have to go through a authorized distro dealer. hope this helps,

can you change the Orion logo to the PG logo? Please? and it isn't working---i did the thing in my sig and it doesn't work

the whole thing? oh boy---this is gonna be a long thread.

which ones---i will walk you through them----

looks mean NOTHING----it's what is inside that counts.

I learned by trial and error---I have been doing modding since 1995---just buy as many books and read them---Autosound2000 Tech Briefs---Loudspeaker design cookbook--etc.

overall=Brahma or XXX depends on your needs RE XXX =clone of a Brahma with higher Fs---woop dee doo---I love there stuff also but come on---it just "looks" better than a Brahma---I see them as 1 company 2 differant names Adire=SQ RE=SPL

wow---they changed a few questions around----anyway--still 100% :punch: "knocked it out"