BigCProductions99

Jon, As Much As I Love Ya Man, Take A Good Hard Look At My Avatar.

And If You Do It The Way I Mentioned, You Could Drop Objects Ten Feet Above The Roof And It Shouldn't Dent The Whole Damn Thing Nor Should It Move, At ALL. And When You Do The Square Over The Plating, Do It Like A Tic Tac Toe Board, Even Spaces Vertically And Horizontally.

1/8th Inch (Thickness, Not Width. Width Should Be About 4 Inches Or So.) Strip Plate Vertically And Horizontally, Heated And Formed To The Curvature Of The Roof. Thicker Wall Thickness On The Square Tubing, But Not Bigger Diameter. (Same Size, Just Thicker Walled.) Then (Think About A Roll Cage Or Roll Bar On This.) Either Take 1 1/2" Overall Diameter Round DOM Tubing (Or Chromoly, Doesn't Matter.) Or The Same Square Material, After The Initial Bracing Is Done, Space Them Apart About A Foot From The Center Point Of The Roof At The Very Back Of It, And Take Them To The B Pillars Of The Doors, It Should Make A Triangle Like Opening In Between, Then Cover It With Some Sorth Of Thin Sheet Metal And Tack It (Weld) To It To Cover The Space. Then Cover It With A Closed Cell Foam Sheet Or Carpet, For The Initial Bracing On The Roof Itself, I Would Use Some Cut Up Sound Deadener In All The Spaces You Can, Then Cover It With Whatever You Like. I Would Also Do The Support Beam Theory (Like The Roof To B Pillar.) To The A Pillar (The Part Next To The Windshiel On Both Sides. NOT The Moving Door Parts.) Run A Tube Like I mentioned Before Or A Piece Of That Square. These Should Be Short And Welded High Up As To Not Block Any Entrance Path Or Viewing Path. I'll Show You Some Mock Up Pics When It's Daylight To Show You Better. I'd Also Find A 220V Mig That Uses A Shielding Gas, Not Flux Core.

And As A Side Note, Don't Educate Those Mainstream People. They Are Our Entertainment, Our Puppets To Laugh At. The Idiots Of The Industry. Without Them, We Wouldn't Laugh As We See The Face Of A Completely Demolished Kid Who Thinks He's Got A Big Pecker With His Kicker Or RF 12"s.

If That Shop Is In Texas, I'm Gonna Come Through With My Sundown Powered BTL And Show His Ignorant Ass What's Up. He'll Also Get A Taste Of My Warden When That Build Is Done.

Considering They're Coming From Las Vegas Nevada, ALL The Way To The UK, I Wouldn't Bitch About Their Prices. Just Get An Ascendant Audio Mayhem From Him, They're Already There As AA is Dealer Based. (CHEAPER.) (AA Is The Dealer Based Operation Of Fi (Same People), And The Mayhem Is The Equivalent Of The BTL, And It Comes Fully Loaded, Unless You're Into Aesthetics, Which A Car Audio Enthusiat Shouldn't, And Think The Spaceship Motor On The BTL is "Cooler", That Would Be The Better Option Pricewise.)

Can't Lose Either Way. I Really Can't Pick Myself Because I Love Fi/AA And Incriminator, As With All Other Sub Manufacturers On This Forum. I've Never Heard The 187's But I've Heard Great Things, The Assassin's On The Other Hand, They'll Kick Your Ass If Your Not Careful. Cute Little Bastards.

Do They Hold These Types Of Comps With This Specific Rule Sheet Often?

Screw Elemental Designs, I Wouldn't Give Ben A Damn Dime. Look At The 13Ov2, What Does It Look Like? (Easy Question.) And The Suspension On A 19Ov2 Is Horrible From What I've Seen. Don't Get Me Started On "eDead" Either.

If You Do It Right, Just One Of Those BTL's Could Crush All Of Those.

I Saw Your Compitition Thread On PAP, How The Hell Would They Let Punks Get Away With Playing Port Wars In The Outlaw Class? Sorry Ass Officiating, IMO.

[email protected]

And Depening On When You Ordered The BTL's, You Can Probably Get Them Changed.

No Sense In Doing That, Loss Of Cabin Gain. Wait....Speakers Facing The Back Of The Trunk And Port Into Cabin? If So...No...That Equals Cancellation.

...Pwned. Glad I Live In The USA.

Make It 4 In A Weeks Time. Billy Mays Just Died. Well....I'll Never Have To Listen To Him Yell At Me To Buy Oxiclean Or Kaboom Again.

Look At Their T1's And T2's, They're Nowhere Near The Quality Level Of What They Should Cost. Most Mainstream Manufacturers Are Directed At Punk Ass Kids That Are More Into Looks Than Performance, And Don't Know What "Performance" Truly Is, They (Manufacturer) Try To Make You Believe You Can Be The Loudest Out There With Their Equipment. I Got News For 'Em, They Ain't. Damn Shame, Rockford Actually Did Make Good Subwoofers Back In The Day.

x2 Common Chamber?

Yes, You Can Use External Ports, But There Is No Way In Hell An Optimal Box Is Going To Fit In That Trunk, Much Less Without Choking Off The Port. Why Not Do A Mini Wall And Take The Back Seat Out?

The Better Amp, IMO.

Oh, It's Also Nice To Find A Guy That Hates Mainstream Crap The Same As I Do.

I'm In Kilgore. I'll Meet Up With Ya Whenever I Can, Probably Will Be A While Though, I'm Stacked Up For About 3 Months On Getting My Next Build Going, And I'm In The Process Of Rebuilding A '83 Solid Axle Toyota Mud Truck And Helping My Dad Out On His Jeep. Ain't Too Far From Longview.

Isn't Going To Work. Even If It Does All You're Doing Is Adding Unuseful Mass To The Cone.

Again, You're A Genius, That's The Exact Vehicle I Was Looking For. Now I've Got To Find One, And Figure Out How To Cram That Sucker Full Of Amps And A Warden 21". Plus My Big Ass.

If I'm Not Mistaken, AA Has An Arbiter Crossover For Them. ....Or You Can Run Active.