Juslivin

It was off. I think there is something wrong with the amp i received. I tried hooking another amp to my sub and it worked and i tried hooked different subs up to the 1000D and it still didn't work so im sending it back to jacob.

What kind of music do you listen to, what kind of truck, How much space do you have to work with, Are you focused on it being loud or sounding good, Do you want to run ported or sealed, these are some questions that would better help us, help you.

Bad ass setup. I have a "gamer" pc also with a Black edition asus processor and dual 8800 gts along with 4 gigs of ram and raided hard drives.

Oh lol, i just figured since you posted that thread about your phone being down that you gave it out to people. Anyways, i emailed you.

I checked the amp with a multimeter today and there is power going into the amp but no power coming out. Why would this be?

I see. I have them all centered. Im going to bed for the night but will be back on tomorrow morning for help. Feel free to post anything that you think might be the problem. It sucks when you finally get your system in and it doesn't work =(

How is it wired? i have my sub wired like this 1 dvc sub and 1 ohm. Im not sure i follow. I just hooked the LOC up the way the manual said to.

Lol yeah. I had 2 12s in and they worked fine... i took them out and hooked up my icon and it doesn't work.

What does your it say.... It has the date they shipped it and or it says billing info recieved. The tracking number will tell you everything you want to know.

Yep the scosche one.

Sorry, SAZ 1000D

i had the volume about 3/4 of the way up and the bass all the way up. I then tried to feel if the sub was working and it was not. I turned the bass boost on gradually all the way up and it started moving a little and then i started moving the gain higher little by little and i got it all the way to the max and it was barley hitting.

I still have the stock HU in for now.

on the HU? Theres no HPF on the amp and i set the LPF. I have everything set up. I do not know why its not working.

bass was all the way up on the HU

A stock electrical system will power a 1000 watt amp.

I have some 4 way 6.5 pioneer comps ill see you. Speaker Size 6-1/2" Design 4-way Peak Power Handling 220 watts RMS Power Handling 50 watts Sensitivity 91 dB Frequency Response 30 - 30,000 Hz Impedance (per voice coil) 4 ohms Top Mount Depth 2-5/16" Bottom-mount depth N/A Cutout Dimensions 5" * 6-1/2" 4-Way Speaker * Interlaced aramid fiber reinforced IMPP cone woofer * Long voice coil design * Latex damper for enhanced linear bass response * Foamed PPC(Pearl PolyCarbon) balanced dome midrange with strontium magnet and magnetic fluid for open sound quality * RMS Power: 50 watts * Peak Power: 220 watts * Sensitivity: 91dB * Frequency Response: 30-30,000Hz * 4 ohm impedance * 1-year Sonic Electronix warranty If you want, i don't think they make them anymore and they are just sitting in my closet lol. Edit - heres a pic, Sorry for the double post.

I have some 4 way 6.5 pioneer's ill sell you. Speaker Size 6-1/2" Design 4-way Peak Power Handling 220 watts RMS Power Handling 50 watts Sensitivity 91 dB Frequency Response 30 - 30,000 Hz Impedance (per voice coil) 4 ohms Top Mount Depth 2-5/16" Bottom-mount depth N/A Cutout Dimensions 5" * 6-1/2" 4-Way Speaker * Interlaced aramid fiber reinforced IMPP cone woofer * Long voice coil design * Latex damper for enhanced linear bass response * Foamed PPC(Pearl PolyCarbon) balanced dome midrange with strontium magnet and magnetic fluid for open sound quality * RMS Power: 50 watts * Peak Power: 220 watts * Sensitivity: 91dB * Frequency Response: 30-30,000Hz * 4 ohm impedance * 1-year Sonic Electronix warranty If you want, i don't think they make them anymore and they are just sitting in my closet lol.

Alright so i was messing around with sketchup and i think i have decided on what enclosure designs i want. Specs are not perfect im just aiming for design right now. I want opinions of which you would get or which would work/sound better. Keep in mind its going in a full size standard cab truck #1 #2 #3 (I wont have both ports just didn't know if it would be better to port it on the top or bottom.)

google sketchup

Quick question, My 0 gauge won't fit into the amp power and ground, what can i use to make it smaller? I have seen banana plugs but i can't find one that will fit 0 gauge and i have seen distribution blocks but i can't find one without a fuse.

Got the wire and the truck today, 04 GMC sierra. SLE package, 39k miles. Im happy Ill take pics tomorrow and expect a build log soon

Just bought this package but with the 10 inch sub, can't be happier with what i received. Even better than what i was expecting. Package

I plan to wire my sub to my amp like this, My question is, would it be the same if i ran 1 positive wire out of 1 positive terminal on the amp into 1 positive terminal on the voice coil and the other positive terminal on the amp to the other positive terminal on the other voice coil and the same for the negative?

Can you guys not see the picture in my first thread? I know how to wire my amp to my sub....... I'm asking if i can do it the way above.