JimJ

mmmhmmmm ziptiez

uh uh , your the wire man remember. Don't make me come get you . I hate wiring enough to do it ..... It'll be like the Ram, I'll grease the wire up nice...

Still have a pair of cubic foot cabinets that I could put something in.

This winter will be spent...doing absolutely nothing because I've hit the limit on what I can put in my apartment Can't go bigger than the BIB's, can't do TL subs...

Let alone lifting something that requires 6 sheets of ply per side.... I have big friends

What about Italian dicks?

And BIB's are actually very small for horns, the footprint is next to nothing. Compare that to something like a Decware Imperial Horn...I wouldn't have a chance at even getting that up the stairs.

why do they have to be that big? Those speakers actually require an enclosure that big? Hoffman's Iron Law. If you want lots of output with not a lot of power, and the speaker you're using doesn't have a lot of linear travel...there's going to be some big peekas goin' on. You can run Eminences (and Fostexes, for that matter) in bookshelf sized enclosures, but they wouldn't have balls in the midbass.

top

I'm five hours or so from there...

I wouldn't.

ADS made some good stuff, DLS makes a good 7 channel, Eclipse has a 6 I believe, pretty sure Helix and Brax do as well. None of them are cheap

As long as your amps are capable of it, there's absolutely nothing wrong with it. Where it gets interesting is if you're using passive crossovers, then you have to start taking impedances into account because it shifts Xover points, but running active you have no problems

yea sorry i meant to put that..... i already have a good active crossover, Coustic XM6. but do you think two 6.5's and 2 tweets will be loud enough to be heard with 150+db bass setup that i am doing? ...Turn down the subs when you want to hear the front stage?

Don't get hung up on the impedance. It'd be tough to find something better than the Nextel in that price bracket...

A true TL for 2 18's would be the size of a refrigerator, and that's with a folded line. With a straight line, you're talking about something 14 feet in height...

Are you guys staying down there for the weekend? Call me if you want to do dinner one night or something, I do kinda know the area

I design boxes when I have to If I really care about the results, I'll do it by hand...or if it's for a specialized design I'll talk to people who have extensive experience with that design...like Martin King's MathCAD models for transmission lines.

BB6 is crap for designing an enclosure, and he should have all the specs he needs there anyway.

About the only spec that could potentially be useful that I don't see listed is coil inductance...the rest can be derived from the specs already there, like maximum impedance at resonance or efficiency (as opposed to sensitivity). What is he doing that he needs other parameters?

That's the general idea...although you don't need three two-channels, a four channel and a 2 would work just as well, or a single 6 channel...like I said before, doesn't really matter how you get there but that's what you need to be able to independently control them.

What's the front stage look like?

Three classes before the weekend. Blah.

Ramos... http://www.parts-express.com/pe/showdetl.c...tnumber=260-335 Back in stock?

Probably going over to a frat place tonight, I'm friends with some of the brothers from my dorm days, so it's not too bad...