sinistervr6
Members-
Content Count
29 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout sinistervr6
-
Rank
Newbie
-
another "please help me build a box"
sinistervr6 replied to sinistervr6's topic in SPL & SQ / Fabrication
does it make a diff?... im not sure how port tuning works and thats why i am asking -
another "please help me build a box"
sinistervr6 replied to sinistervr6's topic in SPL & SQ / Fabrication
Since everyone lieks pics, maybe i can get some help then thinking of a box like this -
car- lexus gs300 music- hip hop and rap sub- audioque sdc2.5 12 amp- jl audio 500/1 max height- 14.25 port tuning- figured 38 max depth- 14.125 max length- 31.125 using .75 thick mdf i get roughly 2.75 cubix feet.. so i figured with sub displacment and port i would be at about 2.5 which is what audioque is the biggest i should run the box.. now with the port i put in 2 inches wide by 8 inches tall and i would need a port length of 7.51 inches.. now my question is does all that sound about right? should i have the port longer? when i did the port at 14.25 tall and 2 inches wide it said i needed a port length of 14.71.. basically just looking for some advice on what to do with the port and how to build the box
-
that sounds like the best deal to me
-
its not about the 1500, im trying to understand what the diff between the bl and q is
-
so with a bl should i expect more booom? if i was to put either the q or the bl in lets say a 3 cu box, square port tuned to 33hz same amp same everything only variable is the sub between teh bl and the q what should i expect the diff to be?
-
thank you and i will try to steer clear..so can some one tell me why to go with a bl and not a q? they both handle the same amount of power but the q has a xmax of 27mm where as the bl is 21mm..is the bl more for spl? and the q for sq?
-
thank you i will deff look into it...how about the us amp XT4000D?? says 1500 at 1 ohm and its under $400 depending where you get it from
-
so stick to sundown your saying
-
i dont have the jl yet i have there 500/1 but a co worker is buying it, so i was just going to take the money he gives me and put in a extra $100, and get a jl 1000, but if it will be easier i can just get the sundown 1500 or 1000 its about the same price, also what about us amps? i saw they were a forum sponser, are there amps any good? they have a xt4000d thats 1500 watts at 1 ohm
-
amp wise im looking at about $400 buck range..besides price would i look for a sundown 1200 then?? or there 1000? also with a sundown since they are 1 ohm stable would i get the d1 then?
-
yea sorry just looked at there site, its the 1000/1 version 1 its 1000 watts at 1.5 ohms-4 ohms..
-
It's a good match for rap. ok so i just noticed the bl is the same price as the q..now as far as options i see the cooling is $0 for it and the p chamfer is $10 but it wont let me pick the option it says that its included with the cooling.. is that correct? also flatwind option and daily is what i am looking for correct? and since my amp is up to 0.5 ohm stable should i get the the d2 so that if i later change the amp i dont have to worry about ohm load?
-
ok so the jl 1000, but why the bl? why not the q or ssd?
-
bump for some help