GeRm

There are always options but I want to see what numbers it will put up once deadner is in the car and I can play with the box placement. I'm sure there is a 43-45 in it and I would be happy with those numbers. My car flexes BAD

Metered Wednesday with that tall asian guy from Modified lel. Never metered before, no deadner, gains werent set all the way to where I want them and low power. Numbers were on music and peak hold 139.22db @ 35hz 136.00db @ 28hz I know there is a 140+ in it just needs some work This was with the meter on the dash/window, Passenger door sealed up and drivers door open and on the SSA APM meter. Video coming soon from Mr. Modified himself.

i5 4670k 3.4ghz OC'd to 4.2ghz 16gb DDR3 GTX 770 4gb Windforce 2x 128gb SSD 750gb and 500gb rotational HDD's Corsair GS800 PSU MSI mobo and some other shit lol

Might meter tomorrow on one of those new fancy SSA meters. Will post another video and results. gotta move the box back a bit cause the port is like 2 inches from the hatch, can't breath.

Thanks, well worth the messed up toe and abundance of scrapes,scratches, and bleeding.

So I finally got a proper video up. If you are using Google Chrome make sure you set the YT video to 1080 @ 60fps for D A T SMOOVNESS lol btw why is d a t censored? https://www.youtube.com/watch?v=GvrHI6jnDdo

2.75 cubes sealed 6.75 cubes ported 85.5 sq in of port area Tuned at 42hz

it's black foam, took the pic at night so it looks like there is nothing there. and i noticed towards the far left on top it looks like it is cut off, but it's not. I will take a close up tommorow Btw the truck is playing, I couldnt run it hard for long because I need to fix the hinge, but it was absolutely BRUTAL. So happy with how it came out. Just need to fine tune some things and fix the latch. Only played it for like 5 minutes cause it was late. I noticed was there was one air leak at the top about a half inch wide, will patch that up, never had to use foam before due to the top being removable, not bad.

Tomorrow, it was too late and dark to run the wires. Back at it again in the morning, I will post vids and pics once she's playing

Alright so this bitch is in! Just gotta do wiring and plug up the amp and all tomorrow! So friggin excited!

Alright so I was back at it today with a clear and refreshed mind vs Tuesday which was a disaster. Things went MUUUUUCCCH better today. I'd say there is about 2 hours or 2 and a half hours to go on this enclosure. Just need to add 2 more 45's, baffle, mount the woofer, and put on the top. I think what ruined Tuesday mostly was that I dropped a sheet of MDF on my toe and obliterated it, it's bad lol. This was early in the day I do not have a picture of what the end day result was Also this guy worked an absolute MIRACLE on those baffles, kid has never done wood work at all and they came out damn near PERFECT Almost there guys!

If anyone has a better idea as to how to seal up a corner with a slight gap, please, PLEASE chime in. I am open for idea's

Pretty frustrating day yesterday, I am not pleased at all with how that corner came out, slight gap in which im hoping expanding gorilla glue and silicone caulk will seal up. Wood took forever to cut as well. Back at it tomorrow

I mean this won't be a 30,000w build kind of deal, but should still get pretty rowdy for my liking. If he has time I will see if me and Bryan the CEO can meter this thing once it's all done as he lives like 5 minutes from me.

I figure I will just dump everything here. Prior setup (Sub stage taken out, keeping front stage) -Alpine Type-R 12" -Kenwood KAC 9104D (Rated for 900w RMS but we know it only puts out 600w) -2.25 cu ft enclosure tuned to 32hz -Kicker 4 gauge wire -Alpine 4 channel amp (45x4) -Pioneer 5x7's (Only running front 2) -Pioneer DEH-X8500 New Setup -Stereo Integrity HT 18" -4th Order designed by Hunter Martin -Pioneer GM-D9601 (@2ohm doing 800w) -Audio Technix 0 gauge kit -Audio Technix Big 3 kit -PAC LC-1 -Other little things for wiring Before And everything yanked out Things that are going in All going in I will update this as the build comes along.