Sencheezy

Yup, works over here now <BR><BR>password318

I haz one

lol me and 14k do share commons things... yes indeed

FAV of all time!!

Gots to be more careful hehe

if you ahve the space, grab the 18", but, if you plan on adding another, it will be a tight fit in an eplorer, not that it can't be done, just saying. I have an explorer, and wanted to do two 18s, but some how that went to 4 15s?

So what can I do about this if it continues? Your current enclosure is sealed, correct? If so, then unloading isn't an issue. Does the amplifier have a subsonic filter? If so, what did you set it to? Low Pass Filter set to? Double check wiring. I can't emphasize this enough. Well I could... Lastly, I would try lowering the gain. If you lower it a bit, output doesn't seem to decrease, and the noise goes away, then perhaps that's all it was. I was told when you have a sealed enclosure the ssf filter isnt a factor. The ssf attenuates frequencies below the tuning of a ported enclosure, otherwise, frequencies below the tuning of the enclosure can cause over-excursion. With a sealed enclosure it's not needed, but some people may still use it because they don't care about reproducing super low frequencies. I asked because if he replied "No, the enclosure is ported", then I would have to ask "what's your ssf set to?" I'm simply killing two birds with one stone. Yes it's sealed. BUT I am getting my ported box tuesday. SSF is turned down all the way. Gain is about 1/4th the way up. LPF is around 80hz I think? Then unloading or over-excursion from below tuning is out. Adjust the ssf a few hz below the new enclosure's tuning frequency when you get that installed, but for now, I would double check the wiring, and adjust gain. Visually check the seams of the enclosure for any light coming through, or visible gaps. Stef I have doubled check wiring, I used the diagram from 12volt. Also, the noise is oddly only coming from one speaker when raising the gain, I have lowered it for the time being. It was just very odd that it was only coming from one. The box appears to be solid, and for me to be able to wire the subs together, I was forced to dril a small hole between each cabin space as they were initially diveded. But besides that, it doesn't appear to have any leaks. the wires going to the amplifier are routed through a hole through the back of the enclosure but is sealed up via silicone. So any air leak is highly unlikely but yet is still very possible. Once new box arrives here shortly, I will post results.

I'll be there repping Team IAK <3 and will be louder than youuuuu!!!!

OP, you can check out my build log, I am using a single ICON on a AQ1200 and couldn't be happier, of course unless I had more

nice catch

I always think your 14k with that display picture. I had mine first

Thank you for sharing

Welcome : D

Thank you sir

lol looking good!

Could a mod be so kindly and move my build log over to the Team IAK section, I would greatly appreciate it. And no 14k lol, I will not be running under 1 ohm.

Thank you Porkchop!! I am very excited to be part of this team and would just like to say thank you very much for accepting me in the family and I can't wait to meet some of you guys in person! Heres to a great new year of 2k12 and Team IAK

more update?

TWO? PSH, not mine lol, Mine is the one on the right though, the seller had about 5 10ks and 7 7ks in total. And was cleaning out.

Got another pick from seller, should be here by Friday Mines the one on the right, and that sticker is the diagram that they all come with and wasn't ripped off completely.

nice build ohjay

I thought ab connecting it on low gain just for giggles

Im pretty sure BCAE will have something for you george

Nice, congrats! How many active users avg a month or week?

Wow, thats was amazing, I couldn't stop reading! Thanks a lot. Ok, well any suggestions you would make in a oh lets say 500$ price range. I am inexperience, but would love to pick photo up as a 2nd hobby. I would want something to last a while, and would take a few shots a day to experiment with settings as you suggested. Dslr, or point and shot really doesnt matter as I am simply looking to experiment with the equipment itself and take decent pictures at the same time. Im pretty creative and would definitely would like to toy with depth, shutter speed and lighting for sure. Thanks again for writing that out sir oh, and I dont plan on taking any classes haha