Sencheezy

Thanks for the kind words David. I really never expected to get so much negative feedback from running 16v....

I am too from Saginaw lol I went to South Middle, then moved to Flint, and now I'm in Nashville. I was actually in flint/grand blanc/detroit/toledo this weekend I have one zcon and one bc5500

If that is RMS rating, then I would go with the higher power amplifier. Edit: Just saw your posting. I would suggest the 1500, simply because it leaves you room for additional growth if you ever decide to go that route.

Kevin, ENABLE taging thank you

Strawberry + Pineapple Slush from Sonic = :win:

IMO its really not worth it.. why have 6 batteries when 4 12v batteries will suffice? Then you have to invest in an ext regulated alt, bracket, regulator, etc etc.. Rather than a single alt + some big batteries. That would far exceed what I've spent on my 12v setup. There are some elements you are leaving out sir. If I was to get the same power I will be getting from this 16v system, on a 12v system, I will still be spending more money on the amplifier, whereas in this scenerio, I am spending more money on the electrical, so where again is the real savings?

me neither! The power increase is bonkers O.o

So I now have a total of (6) XS Power XP1000's and shall be a member of team XS very soon These will be used to power my two Cendo BC5500s I don't need these just yet, but at the price, I couldn't avoid. I will be running an independant alternator for this system as well

bueno

NIOCE!!

gcon

I asked... Duran sent a email over to Aaron. Aaron put in a request to have one sent.

I just finished installing my SSA Carbon Fiber Convex Dust Cap and I am really impressed by the way it looks. I have not taking a listen yet, though I'm sure there won't be any audibel difference. Here are a few photos I have taken. Here is a overview of both caps side by side Here you can that the original cap is "taller". Not exactly sure how this will affect anything. In this picture, it is very hard to see, but I place the new cap over on top of the other, to show that the new cap's "flanged" is just a hair bit longer. In this photo, you can see some bubbles in the crease around the cap before the flange begins. In this photo, pretty hard to see, but really really close up, you can see these "scratches"? I'm not exactly sure where this is from lol. But you have to be really close to see. In this photo, you can see all of its sexyness In this photo, you can see one of the problems I ran into. When removing the original cap, whats left is the glue's residue? I'm not sure what to call it, but it leaves two O-type rings around the former. When trying to lay down the New cap, it would not sit flat or flush. So I was forced to chip away with a small flat head screw driver on the outer ring. The inner ring seems a bit more permanent. Here is the epoxy I just picket up from Lowe's. Seems to work really well. It got real stinky real fast. In this photo, you can see the outter ring chiped away. And here is it installed I got a bit messy This was my first time every doing this, but atleast its clear, so it doesn't look too too bad. Cosmetically though, this looks aMAZEing. Also, I will note that the cap I recieved, did not flush with the cone. It seems that the cone, and the flang are formed at two different angles. Not too too much difference, but enough to not look flush. So I had to use a little bit more glue, and push down as much as I could to try and make sure there is no gaps in between the connection of the cap and the cone. The original cone does seem a bit more "solid" for the lack of term. Like, the original cap is a hard plastic, you could knock on the back of the cap, and it would make a decent "thund". But the new cap, like, I could push it in? If that makes sense. I've never personally handled Carbon Fiber, so I don't know what to expect. Maybe bend but never break kind of thing? lol. It is extremely light though! So overall, I am pleased with this product and would definately purchase more in the future. Thank you very much SSA and Duran for allowing to me purchase another amazing top notch quality item

SUCK IT Report · 5:53am please, no teeth Report · 5:53am oh you dont use teeth? SWEET Report · 5:53am no bish i'm asking you Report · 5:53am no bish IM TELLING YOU YOU BETTER NOT USE TEETH so i blew a sub so i blew a sub Report · 5:54am nooooooooooooooo fucking way really!! Tell the whole story! So much for a Titanium Coil BISH!!!

Thanks! I haz no logo

ENABLE tagging please

I usually keep my "open minded" music to myself lmao. If that would have came on, I would have change it because of her present. does that mean!! not in my rule book.