Sencheezy

I thought the same thing. I looked and looked and finally found in his build thread. sorry about that lol, I'll place them here, I don't like to be a brag whore. Here they are: 145.3 sealed dash 39hz 146.3 door open dash 45hz 147.8 door open kick 45hz

Any news on the SPL driver? The higher RMS driver.

xsd3400.

Well, by looking at the MECA event, it seems I'm actually done for the season. At the beginning I was in class Street 1. But things have changed since then. Soooo, yup lol. Thats ok, This was a great year for me I think. I've come a long way. So now, I have a few months to save up, and prepare myself for next year.

HAPPY BIRTHDAY ADRIAN!! I love the aeros you have sent me and would recommend ANYbody to go to you from this point forward. Man these things are HUGE and a tank!

Was a great day for IAK members down in the south yesterday (me,swift). Had ton of fun and we both had some great turn outs. Can only go forward from this point. But I will say, after I get this nex box built, my build will slow down. I'm gonna concentrate on some of the CC bills that I have accomulated lol.

P.S. I heard the LOUDEST two 12's in my life at this event. The guys name is Keith Stinnett. He drives a grey primared S10. Does something stupid, over the 52 mark for sure. He uses PSI soft parts with a memphis motor if I'm not mistaken. I believe he said each sub weighs over 84 pounds and is using 2 4k amps, forgot what brand. But anywho, really loud. lol

Hes always is on? But only in the iHOP, anywho, HAPPY BDAY!!

Yesterday was a great day! Some was bad, some was good lol Rain and cold in the A.M., then sunny and hot AF in the afternoon. Then it got dark SUPER early, and then got cold....FAST lol. I came out with 3 trophies yesterday. A 1st place, 2nd place, and 3rd place. I am very happy with my scores though. To all I've came behind, had more cone area. Not sure for power, but nonetheless, I did have a daily oriented enclosure, at least this time, with the help of shizzzon, I had some tuning. I always seem to do my best when seans around I come 2nd and 3rd to a state finals winner, with a very nice setup. This was in DB Drab. I did not compete in MECA except for the Ground Pounder event. As I don't have any fuses in at the moment lol. Kind of off note, I REALLY like DB Drag. Its a lot more funner? in my opinion. Especially the DB Drag. Any who, here are the results. Again, I am VERY please. Next up is a more appropiate enclosure utilizing Adrian_D's aero's. When me and Swift did my current enclosure, we were not expecting to use double rms. Next enclosure will defiantely be on the smaller side. 145.3 Sealed on the dash at 39hz 146.3 Driver door open on the dash at 45hz 47.8 in the kick, door open at 45hz I'm sorry for the big font, but I am absolutely stoked that I did a 47.8. This was after about 20 mins of testing the previous scores, checking for peak freq. So, with new box, I have no doubt I can reach a 50 with this single 15" on 5500watts. Then I'm guessing a 52-53 ish with 11k. Here are some photos of Adrian_D's aeros that showed up the DAY of the event All these pictures were taking with my ipod as I left the phone at home I haven't been feeling so well as of late, so I bought some of this stuff to hopefully help. And thats pretty much it. One last thing, So my 2-way active has took a dump on me the night I installed it, I could have sworn everything was fine. Well now, it seems channel one has gone out, and I am hearing this quiet periodic "crackling" noise, either from the tweets or mids. I'm pretty sure its the tweets. But, I was so fustrated with it, I myself have not looked into it much. Prob gna have to send it in to ZED. But until the next update, thanks for looking!

Yeah I'm still there. We have a very large Data Center there in Columbus.

Like I said at the event man, your score's do not represent the way your setup sounds at all. Most and usually all competitors will tell you this, what the meters says, and what the ears says, are usually two different things, and I must say, to the ear, I believe yours sounds so much louder than what the meter says. And to be honest, me as a competitor, I like the way yours sound to the ear vs the meter. Honest to god truth, your setup sounds louder/better than some of the vehicles that did 5 db higher than yours. Way to go. I will admit, to see you double cone and power would be interesting to say the least.

I tease, i tease

So, I'm FINALLY running active processing all through the ZED. I have the tweets ghetto mounted right now on the dash, just until I can get my doors glassed. For right now, its just two mids, and two tweets. 2-way active. Early turn on, I am extremely happy!!! So nice and clear. Ok, so a lot of pics. New bling to match the time piece Old eX/New eX Below are pics of the ToolMaker equipment. ia 6.5 vs zalph 7 the ia Below pics are the installed drivers Below are a few pics of the amps, should light up nicely. And thats it. All now is to spend a few hours tweaking and making adjustments. So far, I am really impressed in how detailed the instruments sounds, how I can literally, hear/feel the vocals. I'm just blown away so far. For the show tomorrow, I won't be able to burp the 11k But thats ok.

That is all.

oh, oh, Can I haz one for me????

bring on the pics!!

I think I love her

I'm saden by this recent discovery :'(

this picture. Even car off... Wouldn't think it would get that low. Oh that pic. My volt meter is not on the most accurate location. It is connected to a relay, which already has resistent in it. But also, both batteries are connected to this relay, as well as many other things lol. Thats why its that low. The D3100 is never below 12.7 when resting.

http://www.lightav.com/car/amps/poweramps.html List of amplifiers

The shows this weekend, and no, as long as I keep the demo down to minimal, I'll be fine. thanks for all the faith guys, I appreciate it </3