zmarshall
New Members-
Content Count
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by zmarshall
-
It is goin in a 01 mustang. It will be ported i just didnt feel like creating the ports on inventor yet. The ports will be on the side with the subs.
-
I have 2 AQ SDC2.5 with an AQ1200D amp. I have a 5 Cube box for them now but due to the fact that it wasnt planned out very good the box in crap and is all but falling apart now. I came up with another design but im not sure how well this will work. The subs call for 2.5 cubes a piece but with my new design it will be around 2.2 cubes a piece and the subs would be pointing pretty much up. I know that these are not ideal conditions for the subwoofers however how much do you think this would effect the overall sound. This is it any comments plz.
-
amp will power on but no sound comes out
zmarshall posted a topic in Amplifiers / Head Units / Processors / Electrical
I got a brand new aq1200d and after i wired everything up the amp has power and has plenty of it, getting almost 14 volts while the car is running, but there is no signal getting sent out from the amp. Ive tested it with a known good rca cable and even used an ipod to eliminate the head unit but still no sound. I don't know what to check now. The amp is not going into protected mode. Going to call audioque 2night after class and see if they have any input. any advise before i go crazy lol -
ok thanx
-
I just got my pair of new sdc2.5's along with my aq1200d amp. I want to wire it to 1 ohm and i believe the picture shows how to do it. However I'm very confused on the size of wire i need to use. I Believe i should use 4 gauge for the power and ground but what size should i use from the amp to the woofers. Not sure what size it is that the amp even takes for the subs. Does anyone know what the recommended size is or what the largest size the speaker outputs on the amp take. One more question what is the proper way to bridge the amp. Any help Would be greatly appreciated. Here's a link to the wiring I plan on using the top picture which will wire it to 1 ohm. Wiring Diagram
-
Audioque 1200D
zmarshall replied to pear_b's topic in Amplifiers / Head Units / Processors / Electrical
Just hooked mine up and so far no complaints with the amp. Bangs the 2 sdc2.5 i got with it -
amp will power on but no sound comes out
zmarshall replied to zmarshall's topic in Amplifiers / Head Units / Processors / Electrical
i checked it earlier and its just that the power light isnt lit up so no big deal it still works and the clipping light works so thats the main point. I somehow hooked one of the output wires up into the wrong terminal. I was so frustrated from everything i didnt check. After i went back to it the next night i realised what i did and ive been bumpin ever since lol -
amp will power on but no sound comes out
zmarshall replied to zmarshall's topic in Amplifiers / Head Units / Processors / Electrical
however my remote gain control is not lighting up anymore idk why i have to look closer though. -
amp will power on but no sound comes out
zmarshall replied to zmarshall's topic in Amplifiers / Head Units / Processors / Electrical
ya problem solved to embarrassed to explain it lol...upon goin back the next day i realized my dumbass had it wired wrong PS look at the smallest details before getting mad lol -
amp will power on but no sound comes out
zmarshall replied to zmarshall's topic in Amplifiers / Head Units / Processors / Electrical
I had it on master but after it wasnt working i switch it back and forth to see if it would work and still nothing -
amp will power on but no sound comes out
zmarshall replied to zmarshall's topic in Amplifiers / Head Units / Processors / Electrical
Ya there is only one set of inputs on the amp and i tested everything with a dmm -
Then why is there 2 pair of outputs on the amp. Thought it was mono when i bought it but it def has to sets of outputs.
-
i ment ohm wise but now i see that it would be 1 so nvm lol
-
I am getting a new 2001 mustang soon and looking into a new system to put in it. I measured and the largest box i could possibly fit into the trunk is 15x28x38. Somewhere suggested 2 SDC2.512-D4 and a AQ1200D which would run me a little under 600.I would like to be able to hit lows pretty good if possible. I was just wondering if this would work or if there is anything else that would be a better fit. Any suggestions would be greatly appreciated.
-
One more question what should i wire the amp to?
-
Ok well now i will have to make sure ill have the money to do all this lol but thanx for the help. Ill keep you updated
-
ya idk we will see id rather not take the seat out but i wouldnt rule it out lol im addicted to bass so anything is possible. but ya I AM A check out the 2200 i jus dont wanna blow my subs
-
ok well thats good news thanks. Last forum told me id never fit it in my car and to go with 2 type r 10s but idk i kno i got 8 cubes of space no prob,,,was gonna try to go for 2 15s but thats overkill in a little ass mustang
-
im planning on spending around 600 on a 2 sub and amp combo and lookin for like 1000rms total but budget can go up some if it needs to
-
umm its a coupe. idk what other stats you would want lol the trunk has plenty of room even tho you would think it wouldnt