Kanaworm$

Actually 1.5^3ft is pretty common size for the SA-12". If the OP could either post pics of trunk area or get us measurments, it would be easier to recommend something else if they are space limited.

This

Why? Why does it need rated power plus 400watts per driver? No such thing as under powering being a bad thing. Consider the drivers being overkill for the amp, and not the drivers being under powered... I should have worded that differently, I know it doesn't need that much. I ran a single SA-12 off 400w & it got loud enough for my liking. I'm sure someone with more knowledge will chime in, but here's my .02 .............. A single SA-12 with 1,000w & a proper size ported box would be louder & more effecient than two SA-12's with 500w each & restraints on box size. And with one you don't have to run it at exactly 1,000w, the gain can be cut down some & leave plenty of headroom. With a pair of SA-12's you're really gonna be pushing a SAZ-1000. Plus, it's gonna be $200 cheaper. You’re doubling motor force and cone area. Theoretically it should be louder than 1 12" on 1K watts. Plus he could always add another SAZ-1000D and strap them to the pair or upgrade to either a SAZ-2500D or bigger.

I think his problem is that he doesnt have the room to give each driver 2 or more cubes. LOL, I know I mistyped and went back and corrected to 1.25-1.5^3ft. My bad!

With the SAZ-1000D I would look at going ported in the 1.25-1.5^3ft range, tuning around 35-38hz. Built in cabin gain and transfer function should give you the deep bass your looking for but yet stay transient. All install dependent though. The SAZ-1000D is(was) a powerhouse little amplifier and with proper setup should be more than enough without taxing your electrical and pocketbook.

C'mon peoples jump on this killer deal. Help out SSA and get yourself one hell of a 3 - way component setup.

What amp?

X2^^ Only way I would use 8 gauge is if I had extra lying around. 12 gauge is more than enough. Look at the size of your tinsel leads, nowhere near the size of 8 gauge.

Welcome ....

Welcome ....

Nice to see Zed coming out with a full line up of great amplifiers. The Drednaught sounds very interesting.

Thanks Nick, beat me to it. Box looks well built. What type of material do you use for your enclosures?

Any updates? Looks like you may have found your problem with the SSF filter being set to low for your tuning. Let us know how it sounds with the SSF filter set higher.

Links don't work for me.

Looks intense! Vids for sure!

The power and ground wire is undersized cca. I would look for another option.

Massive cone area ftw! Brutal! Nice Job!

Looks great! Awesome job Jake and Mark!

How is the port flare buisness doing Adrian?

Me head was fine, I've never gotten a hangover but my stomach was upset and I was running a fever Bad ice with the Crown?

It was terrible last night here on SSA.

How's the head? Is that little bugger in your head still swingin' the sledge hammer?