Kanaworm$

Good to know. I got some silicone to fix a hole in ky buddies sub. But haven't yet. Amazing goop should do the trick? Its a hole from where the drill slipped... Yes it should! try to fix from the bottom.

Dimensions of said box? 1.25 ft tuned to 30hz should work well with that 10" sub woofer.

Amazing goop is what I would recommend if it's a small tear. Silicone can have detrimental effect on some foam surrounds and cause it to weaken so I would not use it.

Sounds like you thought this out. Pairing a 125.2 with an SA-8 would be a great low powered package. I would preferably go ported with the SA series as they seem to shine best ported. But building two different boxes that small will be very good comparison to see what your ears like best. Go for it and good luck!

It's for the pair!

First off is the amplifier under warranty? If it is no worries Sundown will take care of you. Since you have no experience working with 12 volt electronics don't assume the shop did it correctly, were all human and mistakes can be made. If the shop is sure it's not their fault have them install a temp amp just to make sure it's not faulty installation.

The SA will work sealed but they come alive in a ported enclosure. Never worked with the XCON, but have a DCON 10" and it did great sealed but the output in a properly aligned ported enclosure was darn impressive for 1 10".

I would shit can the X's and get the 9500's!

DCON ftw!

Welcome ....

Exactly what I thought when I read the thread title and author... Is say just pick something and run with it and make informed decisions from there. I personally would keep the solos because I know they will be worth more down the road but then again I don't have space for 15s do you think the price of the solos will go up becasuse of them being discontinued?

I would buy those and sell these and there you have your opinion!

Glad to hear the alt will be returned!

Vibration is more than likely what your problem is. Mount some rubber grommets under each mounting screw and attach snugly. I would also complete the "Big 3" up front to help eliminate voltage drop.

Very nice! Great job!

Happy B-Day

Nice first post, especially when you signed up yesterday!

Local DD guys here did a standard ported enclosure tuned to 38hz on a DD M3 v.1 in a Tahoe. Last comp it did roughly 156 at the windshield. As far as enclosure size I want to say they were right around 8ft^3.

Welcome ....

Now that was an air mover! Impressive vid!

Send me some of the those for an independent non bias review!

Why not try porting your current subs! Follow JL specs here. You should gain more output while still retaining the sq.

Damn those are some crazy geat low prices!

This is a great deal on Incriminator Audio!