Kanaworm$
Moderators-
Content Count
6,886 -
Joined
-
Last visited
-
Days Won
28
Content Type
Profiles
Forums
Gallery
Everything posted by Kanaworm$
-
12" in a 2.5 cu.ft. vs 15" in 3 cu.ft.
Kanaworm$ replied to abigor's topic in SPL & SQ / Fabrication
Depends on the subwoofer and it's T/S parameters! -
Patience guys! This will be worth the wait!
-
Try not to let 1 lemon get you down! I understand the frustration. Try the other amp to rule out any installations issues that may have occured. Always a good thing to troubleshoot all wiring when things like this happen. Never know when something my have got pinched or shorted when putting the vehicle back together again. I'm sure Chris will take care of everything for you. Just be patient a little longer.
-
Mmmmmmmmm DCONS!
-
Damn those AA Carbon mids look impressive! Tuned in for this ...
-
Damn! Those new look ICONS are calling my name!
-
Orion HCCA D2400
Kanaworm$ replied to Maggotpuffin's topic in Amplifiers / Head Units / Processors / Electrical
Definately a good thing! -
sq. inches of port area needed per cubic ft. of volume
Kanaworm$ replied to r00flexMag05's topic in Fi Technical
Welcome .... Take your vent height x vent width = square inch of port area! -
Orion HCCA D2400
Kanaworm$ replied to Maggotpuffin's topic in Amplifiers / Head Units / Processors / Electrical
Just a guess, somewhere around $75-150! -
Orion HCCA D2400
Kanaworm$ replied to Maggotpuffin's topic in Amplifiers / Head Units / Processors / Electrical
Better off to leave it to a pro like db-R. But this is a good read .... Speaker Load and Amplifier Failure -
Welcome .... Best guesstimate I would say 1-3 buisness days.
-
Orion HCCA D2400
Kanaworm$ replied to Maggotpuffin's topic in Amplifiers / Head Units / Processors / Electrical
Output transistors! Most likely won't be able to tell unless you have a DMM. -
Impressive scores!
-
Orion HCCA D2400
Kanaworm$ replied to Maggotpuffin's topic in Amplifiers / Head Units / Processors / Electrical
Broke! Most likely outputs! -
Ok i will def check them out...and thanks for the info thus far! You're welcome! Btw..... Welcome to SSA ....
-
Check out the fabricators section: SSA Car Audio Forum -> Custom Fabricators Or Argent Audio SSA Car Audio Forum -> Argent Audio
-
When they are ready, i'm getting in line with my $$$!!
-
bridging and t/a question.
Kanaworm$ replied to SouthPole1989's topic in Amplifiers / Head Units / Processors / Electrical
That is a very nice looking amplifier with a lot of flexiability, good choice! What size mid/midbass are you looking at? Vehicle? -
Your high end should stay about the same. To many variables to say though. As far as the sub set up, you should see a noticeable difference with the added upgrade in woofers and seperate amplifier. To really make those L7"s move you should look into a ported design.
-
Around 3.25 per sub they work 3 to 3.5. I'm no SPL or hair trick specialist but I would recommend at least 156in^2 of port area and tuned a bit higher to 38hz. Just my .02!
-
You added another woofer and more than doubled your amplifier power, so it should be more than noticeable as long as it was installed correctly. But is the box big enough to house 2 10" vs the 1 10" from before?
-
Nice review! For the money they are hard to beat imo!
-
I love U X2
-
Unless you're doing an all out SPL "Burp" style enclosure all the vendors subwoofers will be musical (All install dependant). Some designed for more sound quality like the Fi "Q". If you can supply some max dimensions like max width, height and depth it will be easier to answer your questions and help with suggestions.