Kanaworm$

Welcome ....

Quality over quantity all day imo! It would help if you defined your goals!

Hope you make a comeback! Always enjoyed your builds!

The Lethal Injection Series from Incriminator Audio is also a great all around sub woofer. Built in the USA as well. http://www.soundsolutionsaudio.com/store/products/LI%252d15-D2-%E2%80%93-Incriminator-Audio-15%22-600W-Dual-2%252dOhm-Lethal-Injection-Series.html

Spend the extra and get the SSD especially with your amplifier power!

DCON if your on a budget and using low power! Great sq!

Double check your ground again! Actually find a solid spot remove the paint and bolt it down. A loose ground will usually cause your noise issues. Replace your RCA's if they have slits in them as well. Check to make sure your speaker wires have no issues as well.

Aw cmon you know they never listen to "you won't be able to hear the difference." That is why I posted the link!

If the listed box sizes work I would recommend going with that design. Port size and length will be accurate.

I don't think you will really be able to audibly hear the difference between the two in sub bass frequencies. Good read on crossover slopes .... http://www.linkwitzlab.com/crossovers.htm

Holy ! The V.1 was such a Tank and now to see the V.2 exceed the V.1 is amazing considering the new smaller footprint!

Maybe explain your math a liitle more in detail and then it will be "Sticky" worthy.

3/8" and you have no worries!

Should use brass or copper bolts to help eliminate this resistance!

Well done sir! Thanks for the share!

was that smoke coming from? I'll stick with XS since I cannot find anything on Juicebox!

Fixed ....

I highly doubt it since the capital to start making amplifiers can be sky high.

Welcome ....

Nothing special as Tirefryr stated just a gimmick amp with a special art form heatsink.

Just saw that on Yahoo news. What a Douche driver. All it takes is one asshole to make a company look bad! I'm sure he is looking for a new job after that video got released.

2.2 and 2.1 ohm. Thats why im a little iffy about it and came here to ask Basically your measuring the DCR of the coil and there will be some + - in the readings. As long as it measures close to the other readings I would not worry to much. If it read 0 or on off the wall number I would stay away.

Welcome .... What do the other coils measure on a DMM?

Yes that enclosure will be to small. Actually I would up the tuning to around 35hz and go with roughly 7ft^3 net. With your style of vehicle the cabin gain will accenuate the low bass frequencies. Up fire the subs and rear fire the port so it loads against the rear cargo area. BTW you should have gone with dual 4 ohm so that you can run your amp at 1 ohm mono. With dual 2 ohm your only able to run it at .05 ohm, 2 ohm or 8 ohm. Contact Bromo here for a great enclosure design and you can build it yourself and save some $$$