Kanaworm$

More than likely either full range signal or switchable to low pass. Bromo on here has that amplifier I believe, he will know the answer for sure.

Make sure you have a line out on your Receiver.

Why? Really not applicable imo.

Looking good!

I never owned an SSD but helped somebody build an enclosure for an 18" flatwire D1. I was impressed with how low and loud this woofer was. These are a great buy imo!

I would contact Fi! They should have record of your order and be able to tell you what you selected.

I would try IB first. It looks like you have more than enough room for the pvc idea you had.

I like the Stick Dudes! Simple yet effective. Now on to the lady ..... Mmmmmmmmmmmm!

By cutting off those plastic pieces in your last pic, you maybe able to make a mdf baffle and mount that to the door itself and see if the panel fits over that.

Most times those speakers are mounted in the doors in an IB setup. I would would not seal them up as it might affect your midbass output.

Post some pics of the door. It will be easier to recommend something.

Take a look at Sir-Lancelot's build log. I think his doors are similar to yours.

These are what I use .... Madisound » Screw Size 10, 1-1/8" Hex Head, Black Ox & Wax Finish

It will be box and install dependent. The SA series has put up some serious SPL numbers. The Fi SSD is a very underrated subwoofer imo. Toss a coin as far as which will be louder. Both are great drivers and built by great companies. Budget can also make your decision easier as well.

Thanks man, and theres no comparison. Bass is so much cleaner, ALOT louder and the amp doesnt get hot, ever. I have pics of the AQ guts vs the Sundowns If anyone wants me to upload them i will. You have comparison pics already uploaded.

No need to buy another amp! No such thing as underpowering a sub! You could run your exisiting amp until your ready to upgrade to a bigger amp when you get your electrical up to par.

Yes!

It's about time we see some updates! ... Serious flex! Good job! How did the AQ compare to the Sundown in output?

Internet is why I stayed away from the so called "Mainstream" brands and started to support and buy my products from either "Authorized" online dealers or manufacturer direct. I give Sundown credit for supporting their "Dealers" by mandating a "Minimum Advertised Price". If a dealer is caught advertising below this they are automatically not a dealer and cannot get access to Sundown product.

If you're looking for more output in a single 12" set up, it will be install dependent along with proper electrical. Upgrade to a 12 BL or even a BTL!

Ever thought of going with another SSD? More cone area and motor will give you more SPL while remaining musical!

It should be ok as long as you complete the "Big 3" and run at least a minimum of 1/0 gauge power and ground. If you drop the load down to 1 ohm you may want to add at least 1 battery in the back.

But it's a Jeep! They always score higher! .... Either way the SA series is a great line of Subwoofers! Keep up the great work!