Karatekid

hi there b34tBoX I have the same block and my display light never goes off but i have no problems with it. Hope this helps. Nice block though

Audioque is another option i have 1 SSD 12" w/copper coils being powered by an audioque 1200D and i couldn't be happier. heres a link to their site Audioque The 2200D would fit your needs.

I agree with southpole. But on knu Konceptz they don't carry a 1/0 kit you would have to purchase each piece seperately. Which i did and it cost me a $157. ITEMS: 15' Power 1/0AWG Kolossus Kable 8' Power 4AWG Kolossus Kable 8' Power 8AWGKolossus Kable Distribution block (comes with fuses) Ground block 2 sets of RCAS Inline fuse holder (comes with fuse) 2 Terminal rings I choose the Kolossus Kable cause the flexs is more flexible and can be used for marineand a little more expensive. Don't buy the KLMX cause it only has 10% copper and the rest is silver. Hope this helps

I was wondering when i need to upgrade the electrical in my 00' Jeep Grand Cherokee it has a 136 amp alternator. I have but not installed yet a 12" Fi SSD Sub w/copper coils being powered by an AQ 1200D amp at 2ohms. then i have CDT ES620 comps being powered by the AQ 4X90. Sub getting about 900 watts and the Comps getting 240 watts with gains turned down.

What makes them not a good buy? I believe that they belong to digital designs cause on the packaging slip in the box had the digital design name on it and when they sent me the confimation email from ups it said at the request of digital designs. So they couldn't be all that bad right?

ok u seem like u know alot. So what front stage would u choose? Willing to spend about 500 on speakers and amp.

Ok what would i need to make it possible to do an active set up? Also could u give some sites to..

I orignally was going to deaden the doors. How many watts would u give ur fronts to keep up with about 900 watts of bass? Also Would a 2 channel amp w/crossover be better than a 4 channel amp active? Looking for sound quality

Ok so is it better to get a 4 channel amp with more power and go active or get a 2 channel amp and use the crossovers. I want my system to be loud but i care more about the sound quality.

I have made up my mind on what comps i am getting, there gonna be the CDT ES610. These speakers RMS is at 150. Going active now would mean that i would be under powering the speakers. Right? Cause i would rather have an amp that has more power than the speakers cause i dont want to have the amp at full tilt and not pushing the speakers to their protential.

Hey there guys im hoping u can give me some advice. Im in the need for a new front stage and im at a crossroads? The two im looking at right now are the Alpine pro series or Rainbow soundline SLCkickers. But open to other ideas. Im willing to spend about 350 on the comps. The doors are 6.5's SYSTEM: ... A Fi 12SSD sub in a sealed box with an AQ1200D Amp wired at 2ohms. Giving it 870watts to the sub. as of right now i have a RF punch 360.2 amp powering the comps. giving them about 150 Watts. But going to get the AQ4x90 when it comes out in six weeks, and have it bridged to 2 Channels give the comps about 240 watts. Thanks for the help in advance. ***Watts given are what the manufacter says but u know they are going to do more***

hello