abervintageman42

i was thinkin about gettin 2 of these http://www.sonicelectronix.com/item_6885_Beyma+POWER+12.html in this box in my next truck http://caraudiofactory.com/20002003-ford-f...nfire-p-54.html what do you guys think of that? according to the sites ive been on it need .7 cu ft of airspace, but i just wanted to know if beyma is a decently built product, b/c the specs on that sub seem pretty impressive

ya i kinda had a feelin it would be a mid b/c i never heard of there subs before, and it just doesnt look like a sub

anyone?

thats what i like to see, some houston stuff thrown in the mix, pop trunk wave chopped and screwed hits pretty hard

finally got around to taking pictures of the box

okay guys, i am lookin to build a new box for my 2 12" kicker cvr's, i am wanting around 34hz for tuning and here are the dimensions i have to work with, 39"w x 17"h x 17.5"d and plans would be great i am either looking for the port and subs facing the same direction or subs foward firing and port side firing, any plans would be nice, and i am looking for a slot port, i am not going to mess with a pipe since i dont have a hole saw, thanks in advance.

dude seriously i wish i had that kind of motivation, im 17 and cant find the time to do stuff like that, although i do start my box this weekend so we will see how that turns out

im 17 and cant find the motivation in me to take on a project like that, great work and keep it up!

thanks eric, i will seal everything up for sure, but i am doing this at my friends house so hopefully he has a router or sander to round the corners off with

thanks man, thats actually almost the exact dimensions RE audio calculator gave me and i printed the cut sheet so i guess im gonna use that design, i will put pics up when i finish, i wont start until next weekend though

whats his name? i talked to a kid that charged 10 dollars for box designs using winisd, werent bad plans at all IMO

how'd your 18 turn out on the 3000d? and he will probaly have a similar answer but damn does that thing bump! hits very hard but sounds clean at the same time

i have the dimensions and everything written down somewhere but its going to be 4.603 cu. ft. tuned to 33.67 hz so it should be a decent improvement from my current box, i love my cvr's they are not insanely loud thats for sure but its only 400rms per sub, they have sounded good in every box i have had them in and never had any problems, and i used to clip the hell out of these subs too until i discovered how to properly tune an amp

ya 16 volt set up sounds sick as hell, and i also think you should try out the smd subs, i heard they are going to be beasts

good i measured it out and i wll still have a seat left, a cramped seat but its still a seat

thanks to caligreen i was told that the RE box calculator works pretty well, anyone have personal experience with it? it says i should have 33.67hz tuning w/ 4.603 cu. ft. i think that should sound pretty decent

i honestly have never noticed a difference in town cars and headliners are the biggest pain in the ass ever! take it from me im about to do my second headliner fix and possibly deaden the roof

if neither is your daily driver choose the car that will take the most shaking, rattling and abuse haha

i say do the one that isnt your daily driver but thats just me, i say 4 15's in a wall

anyone?

this will be going in an ext. cab f150 and removing the seat is not an option(no room in teh garage or house) so the box will just sit on top of it

i talked to my cousin earlier and he was explaining different box designs to me, he said that he had a box that was a cross between a t-line and a horn design box, he sent me an attatchment w/ pictures of the different types but i cant find formulas anywhere, i used the search but none of the links for formulas worked so i was hopign someone could help me out... thanks

damn hopefully i wll be able to find something, i just want an extremely efficient enclosure

okay so apparently i put t-line, i meant is there anyone who can give me formulas or a site to get formulas for a SNAIL SHELL(folded horn style i think)

anyone have any formulas or places i could find them at all?