mwerling1212

those are good ideas! thanks guys!

believe it or not, i tried that and still couldnt get it through. the boot is full of wires. its rediculous. well i guess ill give it another go later. thanks for the help.

thanks for the help tripp3r!

I was wondering if I needed to solder the ends of my power wire(1/0 knuconcepts) before i put it into my amps. Same goes for the speaker wire going to my sub and speakers. Also, can i just get a cheap battery powered soldering iron, or do i have to get a nicer one? thanks.

X2 Your 100% positive you can fit a 15 in that trunk in the proper box right? What is the proper amount of cubic ft. for ssa icon 15 in a ported box?

i thought you couldnt get a system???

Im feelin the ssa icon 15 and saz1000d combo. lol

Thanks again!

I have an aq2200d that will be powering a ss rl-p 18 at 4 ohms. When i go to wire it up, do i use the outside pos and neg ports on the amp? Also, i have a kicker 200.4 for one set of components. I want to bridge the amp to make 100.2 at 4 ohms, but im confused when it comes to wiring it. there are two rows of inputs for speakers. one row says amp 1, and the other says amp 2. would i just do one speaker on one row, then the other on the second row? sorry its confusing. ill try and find a picture. http://www.sonicelectronix.com/pictures.php?id=11366

Does this one sound good? http://www.knukonceptz.com/productDetail.cfm?prodID=KLA-1F2M thanks for the help

could i put one rca in the "front" channel on the head unit, then the other in the "rear" channel? im confused were the second one would go. thanks

O yea! lol i forgot about the manual. I have one more question on the kicker. it has two rca inputs. which one do i use?

cool thanks!

i just ordered all of my wiring from knukoncepts and i want to make sure i got the right fuse type. I have an aq2200d, and i got the 200A fuse type. Is that right?

Dont forget Soundsplinter!! it only took 4 days for my sub to ship!! And Mike kept me up to date the whole time!

I got 0 gauge so im good.

haha i will. thanks for the help everyone!

Im about to start building my box today, and i want to know the right screws and glue to get for it. thanks for the help.

I think ill use drywall screws. i have one more question. Do i have to pre drill the holes to mount the sub? thanks for the help :bigclap:

Sweet thanks!

Thanks. i was just making sure there is no "supreme" brand or type. lol i want to do it right.

Woooo i cant wait to see this! i think you should seal it first, then if you dont like it, try ported. im sure you have an idea what rl-p's sound like ported anyway! lol

haha! I was a jackalope once! lol.

Im about to purchase all of my wiring so i can get started building my system, but i want to make sure i buy the right stuff. My system consists of one ss rl-p off of an aq2200d at 4 ohms, polk momo component set, and a kicker zx200.4 running those. (stock electrical). I talked to a guy at knuconcepts and he told me i should get the 0 gauge kit, with a knd-23 distro block that has 2 0 gauge ports, and three 4 guage ports. He said i should run the 0 gauge kit to one 0 gauge port, the run some 1/0 from the other port to the aq2200d. then run some 4g from one of the 4g ports to the kicker. If that made any sense could you tell me if that works? lol

thanks for the help!