djjdnap

Not gonne lie i stared at this and this for a while oh yeah nice box too, lol

if that would would have came off while u was pullin on it. good stuff seems like though

no go on the diagram

might be the fuse holder

Sounds like you should run another run of wire to ur bank if its dropping that much in the rear. check grounds.. snds like a voltage drop

1.yup http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=12#results You can just ground 1 to the chassis and then to each other, or run a wire from the front - terminal to the one in the rear and not worry about chassis and all + to + , - to - 4. yea everything has to be grounded to complete the circuit for it to work. 5.yea that should work blue is usually Rem wire, but i assume u checked that on the diagram. 6.really it only has 1 out? odd, but yea get a y connector.

yea 68cents for 1/0 isnt bad at all. Most places ive seen is at least a dollar.

yea i would said a bolt through the wood, tack weld the bolt the steel. or bolt and nut. orrrr DUCK TAPE!!!! lmao

well in theory more vibrations from the car is a loss of DEEBEEZ. Thats y people all hold the doors and sit on windows at shows. I'd do it just because sometimes vibrations just sound like ass from the outside of the car.

wood glue, screws might pull it closer. and last i agree wt cobra, get an extra piece and glue it to the inside of the box. or saw dust and wood glue is always a win.

how much for both of those batts? I can ducktape them back together lol

So i can clip my subs even faster? I must have this, cuz i cant turn my gain up anymore more DBeeeeez :rofl2: J/k

stainless or zinc i suppose

Dont think your going to notice the difference

all i read was you spent 100$ on optical out cable Thats like paying 100$ for HDMI cable or RCA's u must be ballin

yea if the car was on it should have been reading 14v or so along with the battery.

sexy times??? lol LMAO dont think ive ever used straps though. i should for deadlifting, but ehh

If i remember right. the fuse panel is on the passenger side. Find the radio or antenna fuse and run a wire from there. Dont remember which one i used when i helped my friend install his. If you have a test light, find one that cuts on when the key is forward, backward, and on. And he is talking about his HU not his amp FYI.

http://www.mechmanhi...ost-Module.html

bought a bar 1.25x1.25x36 for 36$ on amazon they had 24in length for even less, shipped in like 2 days search for aluminum flat bar.

Well went to radio shack today got 4 rectifier diodes 50v 6A, for like 2.49$ Soldered some wire to the tips, heatshrink and electrical taped them up. cut the wire, put the diode in between and presto change-o well it was at 14.7, rev it a bit and highest it went was 15v. 15.2v. although after reading some more the voltage drop of a diode is .7, but we'll see.

Coo, i cant finish this dam cookies and cream i have. And yea citi and some other cc companies got that use Epsilon or whatever got hacked. I got gas 2 times in 1 day and my cc company called me lol. I'll try 2lbs first, my mix was like 15$ a Lb lol.

Hell yeah man crazy. 1800$ down to 5$ Looked like some y2k type stuff. the one family had 7 kids. But the last one was only a fat couple lo find me some coupons

the trueprotein forum