Jump to content

djjdnap

Moderators
  • Content Count

    3,482
  • Joined

  • Last visited

Everything posted by djjdnap

  1. djjdnap

    IAK Slamology roll call

    chuck ur more like a wooly mammoth lol
  2. found this pretty helpfull for ur car http://www.hondaaccordforum.com/forum/audio-visual-electronics-10/h-o-alternator-replacement-big-3-wiring-32622/ also looks like everyones 180a alt is around 350$ But im sure you can find used online for cheaper.
  3. I agree with the big 3. you can get a decent alt for 300$ An extra battery would be cheaper, but depending on what the stock alt is an alt may be your best bet.
  4. djjdnap

    IAK needs an "IHOP"

    doesn't Stephanie santiago attend Indiana University?
  5. djjdnap

    IAK Slamology roll call

    The hulk riding a white elephant
  6. djjdnap

    Beware! Skar Audio poor customer service

    MaliBoom will change your mind lmao
  7. 13.2 isn't low at all with my heat on my truck drops to 12.x HO alts suck at low rpms, but 13v is nothing to be worried about. get a smaller pulley to fix the problem, unless your car is pcm controlled alt, then you have to go buy some other stuff, but figure that out first and we can go from there.
  8. djjdnap

    IAK Slamology roll call

    I'l be there with one of these on On my bike if this truck keeps acting up.. If not I plan on it being a very loud day
  9. djjdnap

    Hertz EP1D Amp

    dibs on the wire and fuse
  10. djjdnap

    Big Dilemma for my New Dodge Dart.

    my brother has a 09 lexus gs. I dont know what the door speakers are but thiers a 8 inch sub and it makes a world of difference. He turned it up and i was pretty surprised at how loud and clear it was. But anyway, i had the cheaper 8" cdt subs in my doors and they were ok. I upgraded to the crescendo 8"s and they seem to have a little more low end. Take it for what its worth, but im no SQ guy by all means.
  11. djjdnap

    IAK needs an "IHOP"

    man its good to shop around lol. Pierce sent me these pics of the cone. PSI sent me this. sounds pretty awesome Pierce wants the same amount reg, for psi's with all the addons. and FI is still the cheapest tho, like 300$ less than both companies. I can hard wire the sub on my own which is what I did with the last 2, but coming from the tinsel and not the lead wire itself.
  12. djjdnap

    IAK needs an "IHOP"

    Just emailed them
  13. well you could always run a wire from you + and - to the sub and see if it moves. Will tell you if you sub is blown or not.
  14. djjdnap

    IAK needs an "IHOP"

    cant decide if i want Fi Recones or Teampsi recones. They are the same for the most part, but psi claims they can increase the power handling. Im interested in how because the only thing i see them doing is adding some spiders to stiffen the suspension.. Thoughts?
  15. djjdnap

    Today's 4"VC Heavy Hitters

    man what happened to the days of 350$ being a top of the line sub. 1200$ + smh my heart and wallet start to hurt when I look at some of this stuff, almost makes 8 10's sound reasonable.
  16. I dont like circuit breakers. But its your system and your car, so however you want to protect it is up to you.
  17. djjdnap

    adjusting voltage?

    well whine is usually power wires to close to rca's or bad ground near amp. Amp going into protect could be low voltage, check ur voltage at ur amp and see if it matches what ur reading up front.
  18. djjdnap

    IAK needs an "IHOP"

    im no meteorologist or nothin, but its raining bitches
  19. djjdnap

    Re XXX v3 motor

  20. djjdnap

    Zon 15 caught fire in a 4th order!

    My MT caught fire this past summer, no idea were it sparked up at, was playing and then i could smell smoke, turned it off but it kept getting stronger, till im driving on the highway and see a burst of flame coming from the cone, yea not good and looked alot worse lol. glad to know im not the only pyro on the forum oh yeah and my tinsels sandwitched between spider.
  21. djjdnap

    IAK needs an "IHOP"

    you ballin outa control over there aint ya
  22. djjdnap

    adjusting voltage?

    yea 15.8v? wtf Idd turn on the window defrost, blower on high, bright lights, inside lights, hold the power window buttons lol that should get you down to 13v lmao
  23. djjdnap

    Introducing the all new SSA Evil!

    4 18's on 120v free air. soo .9+.9+.9+.9=3.6ohms i=er =120/3.6=33.33A p=e*i = 120*33.33=4000w orrrr or.9 parallel=.225 533A 120*553=64,000w now that would be awesome
  24. djjdnap

    Wood cuting

    when i first started i cut all my pieces with a jigsaw It took like a whole day to make 3 cuts lmao
×