MECHMAN

Matt's Mustang is ALIVE! http://www.youtube.com/watch?v=lwQDOanUTek

Email is best for now. At this time we are OUT of the 1/0 cable! I will post up as soon as we are back in stock. We sold through this way faster than expected.

The belt will function properly when installed on the ribs closest to the unit as per the instructions. The billet aluminum pulley will also be a 9-rib for your application. You can order by emailing me your shipping information and sending the money via Paypal or by calling on the phone.

Mechman now has Billet Aluminum Overdrive Pulleys! 48mm, 4, 5, 6 and 9 rib available. Natural finish, CNC machined, $49 + shipping. Email [email protected] for details.

If you are just under the turn-on speed this should get you there.

Unfortunately that link does not have the crank pulley diameter. EDIT- Just got your email, Kyle says 5.33" or 5.66" (135.382mm or 143.764mm) The 135.4mm w/ 55mm alt pulley gives you a 2.46 pulley ratio. The 143.8mm w/ 55mm alt pulley gives you a 2.61 pulley ratio. The 135.4mm w/ our 48mm pulley gives you a 2.82 pulley ratio. The 143.8mm w/ our 48mm pulley gives you a 2.99 pulley ratio. Unless you plan on exceeding 7000rpm you should have no problem with the smaller diameter alternator pulley.

Searchable, yes. It may take some doing, but it is available on the internet.

A belt too small will cause problems for sure. They also need to be TIGHT as the alternator produces way more power at low speeds than the OEM and that's when slip will occur. I can go down to a 48mm pulley but that will only make a slip issue worse. That's the alternator pulley diameter, I need the crank pulley diameter to determine the rotor speed.

You may be able to search the pulley diameter online to get your OEM crank pulley diameter.

Looking good! Can't wait to have it up and running!

RPM related issues can be corrected if this will get the rotor speed high enough. With the diameter of your crank pulley and the diameter of your existing pulley I can determine what your rotor speed is and how much it will change.

Email your information to [email protected] for a quote.

Probably going EFI down the road, but this works good for now.

For our September promo we are offering our Denso Hairpin High Output units in 4 outputs this month. Normally we offer only the 270a or 300a units but right now we have received parts to build 220a and 250a units while supplies last. Some retrofits available so more can take advantage of the Denso Hairpin technology. 220a Denso Hairpin- $349 250a Denso Hairpin- $399 270a Denso Hairpin- $449 300a Denso Hairpin- $499 4 different outputs, all with our high quality internals and our 2-year warranty. Adjustable voltage is available, email [email protected] for pricing and details. We have Denso units to fit the following- Jeep- 4.0 Cherokee, Wrangler, Grand Cherokee, 4.7, 5.2, 5.7, 5.9 Grand Cherokee, Commander, 3.8 Wrangler Dodge/Chrysler/Plymouth - Almost all rear-wheel-drive from 1990 to present and most FWD's too. Toyota- All 2.4 and most models from 2003 to present, some earlier Honda- O3+ Accord 4cyl, 04+ Accord 6cyl, Element, 07+ CRV and 06+ Civic SI. GM- Many 06+ FWD's Email [email protected] for a quote. Please include the year, make, model and engine size in your email. COMING SOON- ECOTEC High Output Alternators! After a long wait we have a unit ready to test for many ECOTEC applications. All amperages will be available. With every cable kit or 50' 1/0 spool purchase you will receive a free Shok Industries Fuse Holder. This offer is good until the last business day of September, 2011 @ 6pm EST and all sales must be paid in full at that time. Offer subject to change at any time. Offer only good for items described above, no substitutions. Buyer responsible for paying all shipping costs.

This round of large is larger The last large was more like a medium, fit me too tight. Just tried one of these on and it fit like a large should, I guess they used a different material this time?

We build for this application. Email [email protected] for a quote.

Colorado doesn't get very good mileage (and I don't have an alternator for it yet!)

Who has an E46? Who wants a high-output alternator? Our engineer and I just finished up the E46 Denso kit and it fits like factory! 220a, 270a and 320a available, easy installation with basic tools and uses the factory belt. NO cutting, grinding or other BS required on your BMW to install this unit. Want a price? Email me- [email protected]

Who wants to help us PWN a scammer? Somebody just used a stolen credit card to purchase an alternator from our online store, but we might be able to catch it in time. The fraudulent delivery address is: 1200 Cameron Creek Marietta, GA 30062 The package is shown as out for delivery- If anyone can go to this address and intercept the package, and also post pictures of the building and any vehicle's associated with it, we might be able to catch this criminal. We are offering $500 MECHBUCKS good towards the purchase of any alternator reward for anyone who can do this. HELP US GET THIS CLOWN !!!! It's *******s like this who increase the cost of goods for everyone!!!

I'm glad to hear that we could work this out for you and that you are OK. You being OK is the most important, the rest can be fixed. I'm with Dictator on the Volvo, but I am biased I guess as I have one. When you are car shopping you can email me with what you are looking at and I can tell you what we can build for so you can be sure to have an upgrade. Thanks for posting up the feedback, we work hard to keep our customers happy. Eric@mechman.

Nice tool, looks like it works better than some of the other tools on the market.

It's nice to have this work out in our favor for once.

"Out for delivery" The unit has been recovered! The victim of the credit card fraud has been refunded, the alternator is recovered and we are only out the shipping charge to Atlanta. I call this a win.

Good news @ 3:08PM-