944guy

just making a final pick on subs for the back of a hatchback subs will be in a 2.5 3 cubic box ported and it will be a single 10 have about 800rms to play with at 4 ohms i mostly listen to rap.

box is made off fiberglass to fit inside of a spare tire well and unloads into a false floor that runs the span of the hatch then dumps out in more or less at the back of the seats and its almost done so i dont wont to rebuild it when i get it done i will take pics.

well now that i think of it il probly endup geting a bigger amp. also box will stay the same size and its only wide enof to do 10s and i would like to do a single sub aswell.

I just picked up a Furi HQ 2200 in good working order spent $150. I cant find any info on these. Anyone know what one of these is worth and if there is a spec sheet somewere. Any help would be nice.

Right now I have 2 E8's but its just not enough, so I

Do you think the Icon would out perform the peerless xxls I will post the specs in a bit. I’m fairly sure it would but I have had very good experiences with peerless being built really rugged. Peerless 830877 12" XXLS Autosound Subwoofer $191.25 10+ $172.13 Madisound# 830877 View PDF Brochure (37 KB) Peerless 830877 12" XXLS Automotive Subwoofer Extra Long Stroke Sub Nomex fiber cone Decorative logo and magnet cover Big roll rubber surround 51mm

O and i probly wouldnet sell them untill i got a new 12 in the car.

well the one did start to break. the glue that holds the spyder to the basket started to come up so i had to use some superglue to redo it and it works fine now but i still worry about it when i turn it up.

I listen to rap and 80's hairband music . The box for the E8's is already the best box I could really build for them 2.6 cubic ported. I was also able to hit 139db at 36 Hz with the 2 of them. But I

dident feel like gettting the camera out but heres a pic of the only one i could find. http://img339.imageshack.us/img339/1246/img3409yt0.jpg

I only have like 1 inch of mounting depth in the doors and i dont feel like making custom kicks so i think im going to put a 4 in the dash or if anyone else has a cool idea.

What do you guys think I should use for a single good 4x6 in the dash I would use peerless but they don

i would say 4 inch

I was thinking it would be kinda cool to put two 3's right there next to each other. but still thinking got the bondo on it now i just need to sand probly do that tommarow.

My goals are to have some type of a speaker up front. I have the spot that a 4x6 could fit fiberglass right now just have to body filler to make it a little smother then cut a hole. I was thinking a peerless 4 inch woofer but madisound is out of the ones I want might just have to wait it out or see if anyone comes up with any thing else.

It would be cool to get some then do an experiment to see how much more power it can thermaly handle. i personly think that with how much the vc moves up and down on a spl sub it would push it out but im probly wrong.

Jasper jig? is that like a perfect circle?

dude read down "Ferrofluids are also used in many high-frequency speaker drivers (tweeters) where they provide heat conduction from the voice coil to the surrounding assembly as well as mechanical damping to reduce undesired resonances. The ferrofluid is kept in place in the magnetic gap due to the strong magnetic field and is in contact with both the magnetic surfaces as well as the coil"

It makes a small diffrance beacue the other sub's basket and motor will take up some air space but other then that it doesent matter.

Also if you could take it apart and find out how it blew mabie it was bad tinsle leads and they broke.

I dont know the eights are nice but i think a single 12 would be a little nicer o and i would use swade on the front of the wall if thats how you spell that. it would be removable and mostly for comps.

I was thinking of putting up a wall in the 944 for that massive dmx12 stage 2 i just had some one tell me that if you make a wall in your car you can get pulled over because you cant see out the back window is this true? my other question is, is there a class in comps were u can use a single 12 and if so what is the avg DB that people hit at say 50-60hz and what is the world record with a single 12. Was thinking sub in the middle and 2 6 inch aero ports on the sides next to it. never done a wall but would like to give it a go and maybe get into some comps.

Got it re tested i did mess with the tuning on the box so last time with the peerless it was 138 at 57hz now with the E8's its 138.6 at 38 hz so a little beter but alot lower.

Today i decided to pull my box out and do a resand to remove some dings and dents, while it was out i thought ild take a few pics of my system. The head unit it an alpine dont remember the modle but heres a pic Treo 4 by 6's in the front doors Im In the prosess of cuting holes in the back panles for peerless 6.5's Now pics of the box its made of maple and has two peerless 8's in it. Undercoating in the wheel well Powerd by a zappco 750

Yeah a good amount.