techaninna

I think you are correct the one on the right is revision B with more cooling fins and the left is the OG. My mistake!!

I strapped 1 V.1 and a V.2 with no issues... or at least none that I knew of, but to be honest I was only like .5db louder with two strapped at 2ohm than one at 1/2 ohm.

1. Techaninna 2. I qualify and agree to the terms posted 3. I have a 02 Chevy Avalanche, the current system includes 2 SAZ1500ds, 2 Nightshade 15s, Knuconcepts wiring, and Odyssey batteries.... New systems yet to be determined 4. I plan to post continue or start new build logs here, ***.com, and termpro or clubavalanche.com, also willing to display SS logos on vehicle 5 . I used to sell copied adult films in high school

Just re-built the avalanche again here are the pics. Donor Midgate The gear 2 dual2 Nightshades and 2 SAZ1500s (one is not mine but friend needed money to fix his car so he kinda pawned it to me for the time being) New wires and relay and connectors New Alt Ohio Generator... need to put this in sometime this week All tore out and opened up Box 7.1 cuft after displacement tuned to 33hz with around 110sq in of port Cut out Midgate Filled and fitted Marking openings Wanted to see it Working on the midgate Planing the amp rack Finished amp Rack Finished install well kinda Sounds good and gets loud dont have any new numbers yet.... I hate the way the vinyl turned out on the midgate, the glue sucked and the vinyl is very thin, so that will be redone sometime this year. I still need to add the fans behind the amps and the relay for the fans. Also need to switch the KLM power wires with some hyperflex, and install new alternator. Let me know what you think.

here a Quick video I made today. Drivers door open Passenger window down Back seats up Song is Lil Wayne New Orleans Magic let me know what you think.

Nope.... just s XS2400 back there now and a ol stock one up front. Need to still get one 3100 and put the 2400 up front. Let me dig some more up.... I will try to get a video tomorrow.

http://www.darvex.com/PAC104S/Sound+Quest+0+-+4+Gauge+Reducer.html Should do the trick... or http://www.darvex.com/SPT521/Stinger+0+-+4+Gauge+Reducer.html

Well I changed my mind again on subs Ended up with 2 Sundown Nightshade 15's. Got them today and started the box and new midgate. I swear the pictures do no justice for the subs, they are huge. I am sure everyone has seen pics but here are some more. Buddy of mine had to hold the subs cause they seem to want to stand up on their own. Now my fiberglass midgate is a little more time consuming than I thought but here is the progress. Here is how I plan on attaching the midgate to the box. Box shown with bottom not attached, midgate is also second baffle. I attached the two boards to the fiberglass midgate. using drywall screws with rubber washers.

This is very true but also kind of depressing.

Ok I won 1st place again..... I was the only one in my class. USACI event in Indianapolis 147.8 in the kick

I wish.... I have to go to my nephews b-day party.

I will give a point of view from the low power end even though you are mainly asking about higher power range. 1. one saz1500 at 1/2 ohm 2. daily 3. Considering they are receiving about half their rms I am extremely impressed with their ability to get loud and sound good doing it. I hit a 145.9(dash sealed TL). Just giving my experience.

Second time ever on a meter First time ever competing and I won first in Street C with 145.9. I got there early this morning and was in the lane qualifying within ten minutes of being there. They gave me a CD and I started at 32hz and just went up 3 tracks at a time within 30 seconds until I got to 48hz. I am still not sure where I peak but 48hz was the only track I played on my other 3 runs. Thanks to Sundown Jerry for his advice. Gear: 2 15 Sundown Nightshades 1 SAZ1500 at .5 ohm 1 Powemaster D2400 1 MLA module 145.9 and I think I got more if I can get some meter time to test.

Thanks it was kind of spurt of the moment Sunday morning. If the wife will let me I am going to try to make it to the Ft. wayne show on the 13th of July.

THE Avalanche. ya I hear that Jerry was quite busy. even had an incident with Baldmans windshield Yeah the red avalanche.... Yeah wasn't paying attenting then I see Jerry pouring water on his leg.

No battery? My D2400 is my starting battery. I need another D2400 though in order to run another 1500. i burped 2 3000's @ .5 ohm each off one nsb90 under my hood!! I just want to be decent for everyday driving too. I hope 145+ alt and two D2400s is ok to run two 1500 at 2 ohm (1ohm each amp). that should do the trick but I would get them down to .5 each 2 Dual 2 Nightshades

No battery? My D2400 is my starting battery. I need another D2400 though in order to run another 1500. i burped 2 3000's @ .5 ohm each off one nsb90 under my hood!! I just want to be decent for everyday driving too. I hope 145+ alt and two D2400s is ok to run two 1500 at 2 ohm (1ohm each amp).

did you read my post??? J/K very nice score now for another 1500 and a couple more batts huh I did read you post I guess I thought TL scores where the only ones people post. I just want to make sure my electrical is up to par for two. Yeah though thats the plan get another D2400 and another 1500, and ad244 alt. they might be posting a tl score but there is a big differnce where and how you make the score. most usaci people build different then dbdrag people a guy in usac can bang a 160+ but sealed on the dash cant do but a 153 Yeah I knew usaci was in the kick. Its outlaw with the door open?

No battery? My D2400 is my starting battery. I need another D2400 though in order to run another 1500.

did you read my post??? J/K very nice score now for another 1500 and a couple more batts huh I did read you post I guess I thought TL scores where the only ones people post. I just want to make sure my electrical is up to par for two. Yeah though thats the plan get another D2400 and another 1500, and ad244 alt.

Was on TL, Sealed, on dash truck off.

Thanks man I had fun and hopefully will get a little more time on the meter before I go to my next comp. If everything works out I will be in Ft. Wayne on the 13th of July.

Indeed I will already got that ball in motion. Quick question, I was a lil confused reading the thread, are you powering them with a pair of 1500ds in the vids or just a single one? In the videos just one 1500 I don't have the electrical at the moment to support two.

A week now and I'm still impressed. Just save up till you can get them, they are worth the wait IMO.

Here is a half ass hair trick..... Here is me messing around and noticed shed was flexing a little.