FiAudioSubwoofersjj

And polk mids http://www.sonicelectronix.com/item_9111_Polk-Audio-db651.html powered by my renagade 2 channel amp?

Should I get a pioneer deck http://www.sonicelectronix.com/item_60596_Pioneer-DEH-150MP.html a zero gauge kit http://www.sonicelectronix.com/item_69629_Belva-BPK0D-HOT-NEW-PRICE.html

Why do you assume it would be louder with the 6x9's added? I'll give you a hint, that is a BAD assumption. well I thought the more speakers the more output

I have a 550 watt max renagade amp .... 150 watts rms @ 4 ohms 2 channel for the mids .. Planet audio 4000 watt max amp for my sub

I don't have the head unit or the 6.5's yet just the 15

So the 6.5's will be loud enough for both the fronts and loud enough for the back seat passenger to listen clear?

How will I make up for mids when I get red of the 6x9's because I want my system to be balanced enough so the bass doesn't over power all the mids and I like that surround sound affect ... But of course I need a lot of bass coming from the Sub

So put 6.5's in a baffle then mount the on the back? How do I make this setup look clean with just baffles holding the mids?

So just take out the rears to let the sounds rom the sub goes through?.... Should I put rear mids in a separate box mounted in the back .. Or what should I do to get my mids back from taking out the 6x9's?

Thanks... The actual question is if my deck can power my fronts ... But I realized that getting an amp to power both my fronts and 6x9's is the best way ... No problem I have an extra amp for tgem anyways ... Yea I'll go to zero gauge instead ... For temporary I'm installing an old school JL 15 in a ported box I built with a smaller mono block amp ... Because I still have to build a custom ported box for my 12

Would this be a good setup?

I'm also going to be installing a planet audio amp http://www.amazon.com/Planet-Audio-AC4000-1D-4000-watts-Monoblock/dp/B003GSLE26 to power my 1000watt rms sub

So for the past week i been researching about t-lines and how i can design my own , but so far im just lost . i want to build a t-line for an old rf punch z 10, this is a home project.

i know how to get the length of the port and i know how to get the sq inches for the port area , but the thing i dont understand is how do i get the height and width measurements of the port itself

can any one help and give me the equations to calculate the box airspace and tuning on the box ... bcause i want to learn a very accurate way to design boxes like calculating them by pen and paper without using a software. PLEASE HELP

does anyone know how http://highoutputenclosures.storenvy.com/ designs and calculate their boxes... they r top quality and i wanna learn how to design and calculate them myself

can i power car amplifiers in home using a lab dc power supply?

so this is what it looks like but i have little knowledge using one(probrally comes with manual)

yea so the one i was looking to buy was a vizatek power supply witch u can adjust the currents, voltage and the amps needed so it wont blow

so i am a DJ and i have alot of pro audio amps and i do have Car Audio Subs for my DJ Subs and they work perfectly , but i just wanted to use the lab power supply to test different amps and setups and have like a temporary system to use,

When i Had a problem about a month ago my Sub would make a burp sound once in a while and i was wondering if that damages the Sub

so does it do damage to my Sub or not ?

this had happened when my dads car battery had died but then we changed it and it hasent happened anymore but i was just asking if that one time it made a burp sound if it damaged my sub

whenever i plug in or out my mp3 player into the stereo my Fi Car Audio SSD 12 makes a pop sound .. so when i was playing my music i gradually made the volume louder then all of a sudden the sub will pop and start this loud humming noise.. i dont think i blew it because i played it again and it sounded fine until the pop and humming sound came again

ohh okay sorry mybad