Duran

The suspension will pop, air wooshing through the gap, etc.

https://jobs-tevapharm.icims.com/jobs/6881/job?&sn=Indeed&?mode=apply&iis=Indeed&iisn=Indeed

What you guys aren't understanding is his "500 Watt" amp, even if it is a full square wave, can supply a maximum of 1000 watts to the driver, IF the power supply is able to do so, therefore clipping is NOT the problem in this case.

Put it in an enclosure and see if it goes away, there are mechanical noises when you play free air.

If you don't kill them, they will sue you. If you kill them, their family will sue you. Either way you are fucked.

No, but it isn't a good thing. Depending on the application and equipment, it might not be a bad thing either. i didnt think any amp at full tilt was a good thing.. ahhh i can smell the clipping from here Clipping will do nothing, the only thing that will damage a subwoofer is too much power.

No, but it isn't a good thing. Depending on the application and equipment, it might not be a bad thing either.

So what if his gain is at 100%? That does not lead to a lack of output.

I'm always watching.

Don't port it. It is a High QTS woofer.

Minigun.

It's not 45mm....

I stopped believing in Santa Clause in Elementary school

They probably play the same frequency, he's got them loaded in a benificial way, somehow

My whole direct family works in different areas of the INL, mom is a Radiation Safety Technician, dad is in Engineering Management, and I forget what my grandma does lol

Copper.

Break in is never necessary. Install it and slam.

Do want: http://www.mishkanyc.com/item/bass-new-era--black

[email protected]

http://www.carstereo.com/help/Articles.cfm?id=31

Yes, too much and you lose efficiency.

Lonely Island is awesome

Remember, when you have adequate port area you have the ability to generate more pressure even if you tune a bit higher

I don't have sandals, or boots, lol

Y-splitters will help you amp other speakers, but you won't have channel separation.