Duran

Impedance, not inductance. You are reading the direct current resistance, a D2 coil is normally about 1.4 ohms per coil, and a D1 is normally 0.7 ohms per coil.

Before you buy anymore equipment, do you know why your Level 5 blew?

I finished my Saturday overtime a few hours ago, back at it again tomorrow to begin the normal workweek

I've never seen a female driving a Celica...lol

His girlfriend is nuts. I hope she doesn't kill me in my sleep!

Bench testing would take much too long, they pull a few from every lot to test.

I've seen pictures of enclosures that were destroyed by forklifts, if UPS isn't gentle with packages, no amount of protection will save a package, its lucky to get a box that isn't beaten up.

Depends on the organization, here are some: http://www.termpro.com/asp/worldrecords.asp?Org_ID=1

It's not a Mayhem/SMD hybrid...just a Ti basket instead of a 12 spoke frame.

It'll probably be fail, don't hold your breath.

Mayhem with a Ti basket, nice

Is that all that matters to you?

The 'fattest' cables you can find aren't necessarily the best, or the ones that will work best in your application...

I agree for the most part, certain studios however have don't worse games with time

How is it? Its awesome. Of course it is more like MW2, which I like. It has a lot more features then black ops. Definitely an upgrade over past games. I do hate how busy psn network is right now though. I really need to invest

How is it?

How is it?

A ported wall isn't always more loud.

I've clamped 10,600 watts from the 16KD, at 6.6 ohms.

Give them as much power as you want, if its above rated expect them to fry. Manufacturers recommend a maximum power input for a reason.

PS3, Black Ops most of the time. Some Resistance 3 and Dead Space 2 as well. My PSN is 'Audioaholic7', feel free to add me

Exactly

I'm jealous, I'm a serious gamer, but broke so no MW3 for a while.

Typically driver(s) firing up and port to the rear yields the best results, if that is not an option I'd recommend driver(s) and port both firing to the rear.

You didn't mention using sealed, sorry, forget tuning then. If you want a sealed-only Q I suggest the High-QTS version, if you want the ability to switch then get the normal version. The same thing will happen in sealed as well as ported, cone velocity at Fs reaches maximum, below Fs efficiency decreases soft parts can break. With the Q's suspension, unless you have it in a much too large enclosure you'll never run into any issues with soft parts breaking, remember Fs. also drops with break in as the suspension becomes more compliant, you'll have no problem with 30 Hz.