Duran

Bottom!

I'm with you there! I always got after my mom for speeding and such, I was really cautious in high school...after driving for a while and especially in Salt Lake City I don't drive as cautious anymore I hate the way my wife drives, you now not may things scare me, but her driving is one thing that does. She drives my 4runner like a sports car! Not to be sexist but it's extremely rare to find a woman that drives somewhat safely I competely agree with you! Well, my grandma is one exception, but that's pretty normal All other women drive their vehicles into the ground, I feel bad for their vehicles

I'm with you there! I always got after my mom for speeding and such, I was really cautious in high school...after driving for a while and especially in Salt Lake City I don't drive as cautious anymore I hate the way my wife drives, you now not may things scare me, but her driving is one thing that does. She drives my 4runner like a sports car! Not to be sexist but it's extremely rare to find a woman that drives somewhat safely

I'm with you there! I always got after my mom for speeding and such, I was really cautious in high school...after driving for a while and especially in Salt Lake City I don't drive as cautious anymore

http://www.houston240sx.com/showthread.php?t=49009

Do you have room to move the box more forward to allow more room?

15 cubes at 27 hz. is recommended, yes, I'd still port back vs. up no matter the hatch angle

Look inside the vent holes you see here: You will see writing above the voice coil in a sharpie, it will say on there. That's the former.

Fi recommends no more than 2,000 if they are fully loaded.

Be sure to rough up the surround lip and the basket with 60 grit, then glue in and keep pressure on it for a few hours, let the glue cure for 24 hours and your good.

For music or movies?

Not entirely true , wanting that small sealed setion would depend on how high you'd want the tuning to be ...so in bassracing or european ESPL that will definatly work with a very big vented side. How is Hoffman's Iron Law not 100% true?? wasn't debating on Hoffmanns iron law ...its an iron law ..... In a 4th order bandpass enclosure efficieny is not determined by the size of the sealed side but the size and tuning of the vented side A sealed enclosures efficiency chanced based on internal volume as does a vented enclosure, I think. Lol

Keep it on topic fellas

Me wantz ta b da loud yo

Lol, there is no simple bass and treble setting, do you have the manual? You'll need it

That's what I'd think, when you have your brake lights on.

If you build the ported enclosure correctly, you will be surprised at the power of a port.

^ I fapped

Efficiency is key, like Julian said. You really don't need buss bars on the amp either. I've played with a SounDigital 16K, which uses the same technology as Stetsom, and we got over 10Kw at 4 ohms from it, it has dual 1/0 power and grounds.

In theory the BTL would me more loud.

Ported, hands down

What kind of xmech is it sitting at now?

Do want

The 9887 doesn't need imprint, it can run active by itself, normally you need a bit more processing but it works. Well, sorry my fault for not clarifying that I meant that it needs imprint for some of its features to be unlocked. I wasnt willing to spend money on the imprint, even when crutchfield give you the option to set it up then return it for a $50 fee. 800PRS comes with all 9887 features and does not need anything extra to get them unlocked It really doesn't gain much, like I said you can go full active without it, what more do you need? Lol

Fawk lost another top