Duran
-
Content Count
11,435 -
Joined
-
Last visited
-
Days Won
28
Everything posted by Duran
-
Loving the upgrades Jules.
-
There is smaller than a handful of people who work at Fi, in fact I can only think of 3. The fact of the matter is the polycarbonate plastic is being pushed beyond it's limits, I'm sure a solution is in the works, as this has happened before.
-
No, my dick is WAY bigger.
-
The only thing I know is they are 3" coils rated at 750 watts.
-
I would love to have one of these and do a carbon fiber dustcap and custom logo. I wish
-
3x dbdra 3x iasca event in lincoln city oregon.
Duran replied to liljestrand's topic in Competitions & Other Organized SPL/SQ Events
A friend of mine will be there, Thomas O'Brien. -
They are sent out when finished.
-
ZCON Carbon Fiber Option | Now Available
Duran replied to Mark LaFountain's topic in Sound Solutions Audio (SSA®)
-
See if you can find out where it has come loose
-
I see no problem with your spider joint; the chips in the magnet are purely cosmetic, they probably happened during shipping. Your dust cap is loose
-
yes i am. 2.3 cubes and jl recommends 1.5 cubes. it sounds really go though so i aint to worried lol. no smelly coils yet The coil will not fail, the suspension will fail. Watch your excursion; recones from JL are VERY expensive.
-
Call them, perhaps it isn't sorted yet.
-
can i recone my xcon 15 with an 18 xcon or zcon kit?
Duran replied to manguybro's topic in Subwoofers / Speakers
You need to solder the tinsel leads to the terminals, the voice coil leads will already be soldered to the tinsel leads. 5 minute epoxy or spray activated CA glue will be the easiest to use. -
Pressurizing your eustacian tubes, I gotcha
-
can i recone my xcon 15 with an 18 xcon or zcon kit?
Duran replied to manguybro's topic in Subwoofers / Speakers
Send an email to SSA, '[email protected]' for a basket, they may even be able to just add it to your order. You will need a screwdriver, something to shim the voice coil, a soldering iron with solder, along with clamps, and I think some glue. -
can i recone my xcon 15 with an 18 xcon or zcon kit?
Duran replied to manguybro's topic in Subwoofers / Speakers
The 12"-18" have the exact same motor, the only things that change are the cone, basket, and surround. -
can i recone my xcon 15 with an 18 xcon or zcon kit?
Duran replied to manguybro's topic in Subwoofers / Speakers
The 18" will perform like an 18", in proportional enclosures, an 18" will be more loud and sound better than a 15" on the exact same power. -
can i recone my xcon 15 with an 18 xcon or zcon kit?
Duran replied to manguybro's topic in Subwoofers / Speakers
No, your XCON will forever be an XCON. You can change cone sizes; you would simply bolt on a new basket and install the soft parts. The only way to change the woofer is to change the motor and soft parts. -
I'm always watching the forum Thank you Stefan.
-
Due to how the caps are made, those are brush marks from brushing resin on, as you said you must look very close to see them; the same goes for the small air bubbles. Thank you for the review!
-
Pattenting is incredibly expensive.
-
My XCON is in the same enclosure
-
12"? I can make Carbon Fiber dustcaps if they are
-
Personally I wouldn't buy any of those for myself, they would not meet my goals. I cannot speak for you because you have yet to state your goals.
-
It will be marked on the former, if it is not identified it should default to daily.