_HeC_

ya im definitely gonna go larger and stick to a ported box, i didnt build this one but ill use it until i come up with something ive had a 15" kicker L7 in a 5.5cubic foot box so space is no problem lol does everyone stick to what the website recommends or has anyone experimented with bigger boxes or anything?

got a Mach 5 Audio 15" IXL with a TMA T1000.1(made by JL) side by side shot with a 15" RE SX loving it so far:D gonna build a different box down the road, suggestions? this one is 2cubes@28htz(i think) vids to come, anyway to get a mach 5 decal for the dustcap??

well it lasted for a few months and bumped pretty well, some people where shocked when i showed them the sub haha its dead now

if it doesnt work i lost $8.99 that i spent on the JB weld lol i have alittle JB weld left so i might toss another coat on tonight, also jsut grabbed a new setup....... just a small one this time lol MTX 6001, 600rms@2ohm(i think thats the model #) 10" type R(newer one) ohh and i dont have that other RL-i, its in a buddies car pumping away still... i wanted to tune abit lower but i built the box out of scrap mdf so i was limited with what i could of done..... video tommorow!! lol

its rock solid lol 3 coats on the top and 2 on the bottom.....building a box .93cube@35

2nd coat drying on the balcony

that halfway through picture was when i first noticed it and i know how to setup a stereo system and listen for things etc, when i saw that the cone started to fuck up i tossed JB weld on it, didnt wait the 15hrs cure time adn didnt care if it blew thats why it got so mangled ive ran my old hifonics bx1000D@1ohm for 1000rms on a single kicker CVR, single visonik, bunch of other single lower end subs then the SS and they all still work today except the visonik as that got water damage and all rusty from a leaking winter beater trunk

ya RL-i 10 its JB welded right now lol gonna let it dry overngiht then another layer tommorow

moves freely and coils read good oxsign im in canada, i think shipping might be expensive if ur serious lol

not worth the cash to get it reconed IMO i had 2 in a sealed box with a Hifonics BXi1606D, guess the 2 didnt get along lol this is what they looked like when i first noticed it was cracking i removed the messed up sub and tossed a thin coat of JB weld on it then put it back in a box and then thats when it got ripped to shit lol

yes fibreglass.... NOW before u say it will dry way to hard etc etc the cone of my sub is aluminum i think, its painted but i sanded a small part and its shiny under so im thinking of trying to fix the HUGE crack with fibrglass this isnt my first time with glass so i know how to use it and prep ur piece etc, u think it will hold? damage pic now that was taken after i first heard my sub sounded wierd, this is after i straightened it abit(could probably get it better) i should say this would be a TEMP thing, i jsut sold my last setup and want something to bump until i find something to buy

i also have a 15" RE SX that needs a recone

isnt really any port noise, i wanted to go with a slot port but i could only go 34"s wide and i couldnt get the box tuned above 27hz with hte dimensions i had to work with unless i had the subs firing intothe sky or something... i mgiht try a different box down the road and see how it sounds

build has started! ports are 4.5" OD and 4" ID... 5.66cubes@35Hz subs with some of my 8gauge "speaker" wire lol i hope it fits! had issues getting it into the car so i had to shave the corners of the box for some extra clearance this is where i had my issues with fitment can kind of see the Hifonics BXi1606D thats running them and a little video, for some reason it doesnt look like they move that much with this song :S ill try another 1 later.... rear deck bounces around like crazy, front dash defroster vent bounces, cds fall out of my sunvisor, anything sitting on the front bench seat ends up on the floor haha ohh and it rattles like a bitch! lol gonna see if i can tighten the tailights, put some foam on back of plate etc etc and i stumbled across this in my apartment today, tottaly forgot i had it...install tommorow

since 1 of my 10s is broken i decided to upgrade as i know a singel 10 wont hold me over lol if anyone wants to buy a single 10" let me know some old school RF! but wait it gets better! theres 2 of them and ill be using my hifonics BXi1606D to power the pair, hoping for a ported box but i might ahve to settle with a sealed one