Jacob86

Thank you that answers a lot of questions

Amps Sundown: sae-1200d Sundown: sax-50.4 For the 1200 Gain- (will be set with DMM) Sub Sonic- I was thing about 27hz Bass Eq-0 X-over-??? For the 50.4 Channels 1&2 Gain-DMM Sub Sonic-??? HPF-??? Bass Boost-Lowest Settings Range-??? x1 or or x10 Channels 3&4 Gain-DMM Sub Sonic-??? HPF-100hz Bass Boost-Lowest Settings Sub Fi Q 15 w/BP 4^3 Box 30hz Speakers: Channels 1&2 Infinity Perfects 6.1 Frequency Response (

dual 2 wired at 1ohm

thanks for hanging in there with me

I will be running them of the 3 & 4th channel of my sundown 50.4. I havent a clue right now how to hook them up Thanks for any help Specifications: *Power handling: 70 watts RMS/110 watts max *VCdia: 1" *Le: 0.53 mH *Impedance: 4 ohms *Re: 2.9 ohms *Frequency response: 48-20,000 Hz *Fs: 48 Hz *SPL: 86 dB 1W/1m *Vas: 0.64 cu. ft. *Qms: 2.63 *Qes: 0.85 *Qts: 0.64 *Xmax: 2.5 mm *Tweeter crossover: 10 kHz @ 6 dB/octave *Dimensions: A: 6-1/2", B: 5-3/4", C: 3-

Thank you

How do I wire to the 4 terminals on each speaker.

So do I just need to y the positive and negative from the amp so I can hook up to the 2 +s and 2 -s? I was thinking that would give me a wired ohm load

sorry its a coax, and its from pe here's a link http://www.parts-express.com/pe/showdetl.c...tnumber=299-275

Has anyone ever used these Vifa A16CG-21-04 6-1/2" Coaxial w/Audax Tweeter 4 Ohm? Im thinking about using them in the rear door of my blazer. I will be using them with my sundown 50.4 http://www.parts-express.com/pe/pshowdetl....275&scqty=2 Thanks

http://reaudio.com/speaker_box/LPort_Box_Calc.html

Try using thing http://reaudio.com/speaker_box/LPort_Box_Calc.html Plug in your dims and then monkey around with the port till you get around 30hz

They only good looking one i could find were the Focal 165A3. Are these any good? or can you suggest any thing else. I can get the focal for about $250 so nothing over $300 thanks

15BL-2.8-4 cubic feet ported 15BTL-3-5 cubic feet ported

This is way too much $30 for 1/0 wire http://www.knukonceptz.com/productDetail.cfm?prodID=KOL1/0S Google or ebay for the ring terminals wont be much

ill just keep my infinity perfects then, thanks

sorry that was not what i ment. I dont care what they look like since i proby be the only one that will ever see them.

This is what my friend and I listen to (didnt think i'd find someone else like us) but anyway he has the same sub and its in a 30hz bandpass box and it sounds great. It can really keep up with the double bass. The deep bass sounds good but its not overwhelmingly loud. This is in a trunk. I have a 15q w/bp and I had mine in a sealed box and felt it handled everything well, but i felt it had more to give, so Im building a ported box at 30hz. Mine is going in a blazer. hope this helped a little

I have the basics for this box already, but I need to know if I need any bracing (if so, what kind) or any other tweaking. Also the sub is facing up, does it matter where I place the sub? (closest to the port opening or furthest away) Box is 24x30x15.5 Port Width is 3.9" Volume a little under 4^3 (after displacement) Tuned a bit above 30hz Thanks

alright, so im going to go with a double baffle and 2 45's and in the rear on the box, should i put them in the front 2 coners? and should I add any other bracing?

I've never used 45's how do i know how large to make them, and how would i find out how much volume I was losing?

x2

Is it supposed to come with it or do you have to use your own? Just asking b/c i just got mine and there wasnt one.

thank god i was to lazy to throw the box away, i found everything right where it

im glad im not the only one...ill have to dig through my trash Thanks for the quick response