P-Dizzle

First to reply.... Bout damn time Jacob. That MS DOS built website was killing me.

Someone jump on these. They may be old school but these subs sound great. I have installed about a dozen and everyone of my clients have been very impressed with these subs.

Yes. How long are the power/ground wires?

Sundown, Best Buy and Walmaert should not be used in the same sentence. I would run 4 gauge and an 80-100 amp fuse.

And I have heard the same from a few of my friends who are in the industry.

I receive 10 packages a week on average and many of them are pretty beat up. I have seen dented amps, busted subwoofers, broken MDF and speakers far too often in the past year. I have been in the industry since 1994 in this is the worst it has ever been.

UPS has been terrible this year. I have received more damaged goods than ever reguardless of the vender they came from.

The Sundown is definately more efficient. Installing a couple crossflow fans wouldn't hurt either.

I'll second the Sundown... I highly recommend CDT components.

Nothing wrong. Nothing great. Diamond has taken a plunge over the past few years and a lot of dealers have dropped them. This amp is decent but will not hold a candle to Sundown.

This topic should be changed to "Loose Wiring Problem, with a 100.4".

You mean they had to ground the RCA's because someone disconnected the RCA's while the HU was on and burned up the ground? Pioneer is famous for this little issue.

Grab a 9 volt battery and check the Phase. I am not sure how the wiring was ran but it would be easier to keep the speakers in phase by wiring pairs in series and then run 4 pairs of wire to one point rather than running continuous wiring.

I see the problem... Someone is drinking "Diet" Mountain Dew.

What is this in? 32 Coaxials.

Let 'er burn. That gives you an excuse to buy something new.

ANL> than circuit breakers imo. Circuit breakers are more accurate but get trip happy. I prefer them both. both in the same install is not only overkill, it's wasted voltage/and or/ current. Let me rephrase that. I prefer either or. Not both at the same time. It is a personal preference and I usually let my customers decide that.

ANL> than circuit breakers imo. Circuit breakers are more accurate but get trip happy. I prefer them both.

Throw in a 150 Amp circuit breaker.

Do the internal fuses blow or just the inline fuse? Do you blow fuses if the RCA's are disconnected?

I would blow fuses to if I was stuck with Alpine subs.

I have a review for you... Underrated / Underpriced / Overbuilt

For starters both channels should be used.

That is what you get for custom building me an amp.

Any comments?