tazz

can it be the rca that is the last step i want to change ,whant to put good quality rcas in .i wanted to buy audio graphite rcas but the set will set me back around 450 $.

ok i hear some hissing how that the correct word does that mean the gains are set to high

ok so i know this question have been asked several times but what is the correct way to match amplifier gains

Ok so that helped alot it sounds smooth and the kick base sound great i ended up by setting the mids at 6300 hz slope at 12 highs at 5000 hz slope of 12 ,i noticed that my doors are leaking air so ill have to seal it better the installer dit not do a great yob so i want to take off the deadening and make mdf and seal the holes and then redeaden the doors then i think i will be able to drop to 63 hz ,i will post the results

ok thanks ill do that and see how far i get wil post results thanks

Thanks will try ,the Q what do you actually change from 1 to 3 i know that 1 is the widest and 3 the narrowest but what will change

if dls specs state than the crossover points for mids and highs have to 4500hz but my HU can only set between 4000 hz and 5000hz is there a way to get it to 4500hz

ok so i listen and i think i know what i dont like its just to explain it thats the problem i cant seem to get the midrange smooth

lets see if i can explain it beter ,when i listen to queen i know that queens music has alot of instriments you can hear the guitar but it sounds like its very far away and if its beeing played in a tunnel and if i play country like don williams his voice gets destorted when he sings low sorry im trying to explain the best i can dont have trained ears like you but im learning

i want to improve the vocals and like i said the instraments it sound like its in the background

i know all the rules about settings but can you please help me with some settigs to improve the focals and bring out the instruments please then i can work from there it would really be apreciated

i had the set and my installer sed that goiing active you will have better control over your system ,imy goal is to have a natural sound ,at first i was looking to get morel but over here you cant get them and if you do its very expensive ,the problem is if i set it lower i get like a cracling sound from the mids

please guys i need help ,ive been battleling know for 4 months and im close to tears

another thing will the dls r6a mids be able to handle the 150wrms im feeding them know ,if you guys dont understand me all the time please remember my firs language is not english lol

band 1 - 31.5hz Q 1 band 2 -100hz Q 1 band 3-1.2 Q 1.5 band 4- 4khz Q 1:5 band 5- 10khz Q 1 hope thats better

band 1 - 31.5hz Q 1 band 2 -100hz Q 1 band 3-1.2 Q 1.5 band 4- 4khz Q 1:5 band 5- 10khz Q 1 hope thats better

sorry about that was not familiar how its done wont do it again

sorry about that was not familiar how its done wont do it again

sorry dont know if my posts whent thru so il just have to do it again .i want a warm sound but like most people loud if i want it to be ,i changed some crossover settings and it seems im on the right track its as follows midl 63 slope 12 midh 5 slope 18 and highs 4 slope 18 ,know here is where i gwt confused if you have selected the crossover what does the eq do does that say the starting and stopping points my eq settings are as follow band 1 31:5 q1 band 2 100 q 1 band 3 1 q 1.5 band 4 4 q 1:5 and band 5 10 q 1 if you could some setting to get me to where i want to go please

9887

thanks for the imput m5 . I disconnected the rears and briged the mids on channels 3and 4 and 5and6,i was just wondering if the pioneer would be better even if i wanted to upgrade to 3 way active later .but i dont know if its beter to just buy an external prossesor and keep the HU ,

9887

i was wondering if the pioneer prs99 would be better for competition than the 9887 .the only problem is thet are very expensive in south africa

9887