Nikuk

Cone area owns. And Kents right. 30hz is aweful low for in car. Move up to a 36-38hz and squeeze out as much vB as You can. The bigger box will help keep the little but of low end that You normally lose when tuning higher. If You can get 4ft net per driver, 12ish sq in of port / cube, tune around 36hz with the same amplifier, You should notice much more output to the ear. The bigger box will help make better use of Your amp as well. You honeslty don't need louder in a dailydriver - but need & want are two different animals. -Nick

Who has any experience with CF? such as: http://www.fibreglast.com/category.php?cat...src=HelpfulProd

yah, yah... will do.

in so far its just as FG except with vinyl or epoxy resins. woot ordered a few sample kits and some epox. this is gonna be fun.

I think CF is my next todo funness

thats cool, I already ordered two sets.

Welcome.

I never thought of making a cast of something for glassing! maybe a :duh: moment, but none the less. I'm going to have to add expandable foam to my regular shopping list. LoL

well, reading through fibretalk - it looks similar enough. picking up a few tips and such.

whose worked with CF?

http://www.darvex.com/miva/merchant.mvc?Sc...Product_Count=1 Like so

extended posts for side mount.

*poof*

woohoo for darvex.

sorry bout the delay... been bz. hope this helps

1 Top, 1 Bottom: 19 x 44.64 x 0.75 (thick) 1 Back: 15.5 x 43.14 x 0.75 (thick) 1 Front: 15.5 x 39.14 x 0.75 (thick) 2 Sides: 15.5 x 19 x 0.75 (thick) Vb = 5.0 cu.ft / Fb = 30.7 Hz / F3 = 35.32 Hz Vent: 15.5 High x 4 Wide x 31.75 long. The vent length includes 0.75 for the front baffle > an initial 13.5" board > 8" "U" Turn > 9.5" second board (to make the "U" Turn)/ [/port]4" from front panel.

oh chit, I need to go redo that kids tuning

had to have been corey... looks like she cleaned todau

why does my effing house smelll like pina colada??? i hate that

I made my goals for the quarter at work already. got 4 weeks to pump it up and make lots a moola

gardens done

ummmm

*fart*

top

I wonder then the alero components will get here