zucc

thanks for that link how hard was it puting that adaptor plate on? did all u had to do where drill some new holes? o and i already read his entire thread

the size q i am going with is just a 12" and i was thinking about components but i think it might be to hard for me to tune and i dont no how hard the fabrication is going to be for them? wat kind would u recommend then?

hey guys i have a 1997 f150 single cab with a 95A alternator. i think im going to get for my front stage Rockford Fosgate T1572C coaxial 5x7 and i am only going to use 2 and get rid of the back to stock speakers. I am going to run them off of the sundown 100.2 amp. For my sub i am going to get a FI Q and put it in a ported box and run it off of a sundown saz 1000 d amp. I am also going to do the big three, and for sound deadening i am going to use secondskin Damplifier. My questions are what do u guys think on that set up idea? anyflaws or suggestions u would liek to add? and i am wondering wat different gauge wire's i should use for everything? I also need some ideas for a HU and i only have about 250-300 to spend on that. thank you

kimber thats all i have to say even tho they are really expensive they are amazing hand guns they are the Ferrari's of hand guns

hey guys i am new two the whole speaker set up thing but knows some about amps and subs. My question is i have 1997 f150 regular cab with four speakers one in each door and one beehind each seat. Are these stock speakers active or passive? I really dont know what the difference is between active and passive if you guys could help me understand that would be great. I also plan on replaceing these speakers by next year and i would like two know if i should run an active or passive speaker set? P.s: i also putting a 10 or 12 inch sub in on its own amp, run four speakers on a 4channel amp? and i need to find a new h/u i am looking to spend about 1200. any help and answers would be great! thanks

o i forgot to add i am going to do the big 3 as well

Hey yall i have a 1997 f150 with everything stock. i plan on eventually upgradeing the whole audio system. I am hopeing to get the 4 channel sundown audio amp(i dont no the exact name of it, to lazy to look it up). I also plan on buying either a 10" SSa or the Ssd subwoofer and powering it with a sundown 1000d. I have a budget of about 1200 dollars and i really dont want to up grade my alt. My question is do you all think that the 95 Amp Alt be enough to power the system with little to no light dim? Thanks in advance.

ok i have a nother question. i want to get a finally output of 1 ohm when i wire everything. so that means i have to get the BL' dual 2 ohm set up? bc i am only going to be getting one sub and wireing to one amp. please correct me if i am wrong

thanks guys for the welcome and the advice

ok let me try again when i refer to sound quality i mean that the bass will not sound muddy but will shake and pound hard and still having tight bass that is not to loose. i hope that is better

hey guys i have been reading around alot and i know i plan on buying From Fi when i get some money and a car lol. Well i have wanted the BL's because FI says that they fll the gap between the spl monster and SQ sub. I plan on getting 1 15 and a Saz-1500d amp . My question is i was wonderign how good of a SQ do the BL's have? I no that they will hit hard and shake the ground but i want to still be able to have a decent amount of SQ. i listen to Rock and rap so i was thinking maybe tuning the port to around 35 hz ish? if you all could help me out that would be great. thanks