04yzfr1

1.04yzfr1 2. i agree and qualify to the terms 3. 93 chevy lumina Eclipse cd8505 head unit boston 4x6 plate in dash soon boston 6.5 components in custom door pods (maybe 2 sets) 2 visor monitor dei dvd player audio control 3.1 eclipse ea4000 4 channel for mids fosgate t4kw 2 Fi btl loaded in 12 cuft wall turned to 38 hz all knukonceptz 0 gauge 8 gauge to subs data cell in truck for amps kinetics hc2000 under hood 4. i will post build and before and after videos here, car audio.com and **** i will fly stickers and recommend freinds to second skin and i am at most car audio sound offs in denver. my doors sound like crap ran out of funds to get any damperner 5. i just got married july 25 2009

Just wanted to say thanks to all from fi. Love my BTL's and wouldnt change to anything else. Will always recommend them to anyone

yes sir i had 3 eclipse 12 DVC in the trunk with 3 DEI 1100D

HERES A COUPLE PICS OF MY BUILD

the next show is the 29 at the ultimate electronic on county line rd by park meadows mall

got some videos link below

Advance auto parts did not prime the face of box, bondo the front and sanded

i am in denver, co had a show today and something was up it only tested 148.8 on some p.o.s. meter and i saw my volts drop to 9v had alternator tested can back bad, ho alt. is coming should be here in a week next show is in 2 weeks so i should be ok

got video crappy camera can see flex click link below http://www.youtube.com/user/1upR1 Will have numbers tomorrow and more videos

LOOKS GOOD LOTS OF WORK

DUPONT BED LINER SAMETHING AS HERCULINER JUST COST LESS

It is a lumina and the whole car is dynamat and spray damperner 18's

Interior is the project got save up more cash All 0ga wiring All KnuKonceptz Optima up front 600 Amp fuse 180 Amp H.O. Alternator Custom Built by Colorado Alternator Kenetics HC2000 Big 3 2 18 BTL'S Fully Loaded 14.5 cuft box Eclipse mids and tweets Eclipse EA4000 4Channel Fosgate t4000.1bd 8ga Speaker Wire

A Little More

13.5 cuft over all 12 cuft after all displacements 32hz 8"Height 26"Width 15.75"Lenth that is 208 inch port area Right maybe will it work ? all number came from carstereo.com

Box is 13.5cuft Tune to 32hz After subs just under 13cuft Subs are in a common chamber one large vent this is a slot port what do you think about VENT inside area height 5 in Width 39 in depth 15.5 in This vent will be taking up 2cuft over all this numbers were made with carstereo.com calculator is this going to work good or do i need to rethink it again WILL TAKE ANY INFO

dual chamber, will keep the newer sub from fighting with the older one. and you will not get one pushing harder then the other one, witch will cause the older sub to fail

Thats what i was thinking also, Thank You

does an one know the displacement of a fully loaded BTL the web site say .26cuft but thats not with the 3rd slug, just tring to get as close as i can so that way my port will be as tuned as possible, or is .26cuft close enough

cool thanks think i will do the slot port, this is a weekend car only , and this is also a wall with one chamber

2 18in btl's fully loaded 12 cuft tune 34hz Port wide 18.5 in height 5 in lenth 10 in That is 185 sq in 12 x 15.42 = 185.04 right? thanks

Thanks i dont know if i was going to use a slot port or porting it out just below the subs. looking for ideas though, what would perform better just getting read to start the port and ideas can be changed, please let me know

will have to re think it ..... thanks what do you think on port...

anybody just looking for input thus is the last of my build will this port/vent work

I got my btl 18's last night, they are oh so pretty, can what till they are hooked up thank Fi