rollerdj

I'm needing some box plans for a upcoming build, and I'm hoping you could make some for me, or lead me to someone that can make a set. But, I'm wanting to make a rear loaded folding horn for a single SS 12" RL-p. Is that something you can pull off for me?

how is it that i can get a box for 2 12's but not one for a single. sorry, for some reason it don't see why. (of course i don't get much into horns) could i do another design other than sealed for a good SQ box?

I have room for a pair. Max width is 36", max hight is 16" and I can come out as much at 18". I think that should be enough.

your on ca.com to, right? PM Dave from TeamPSI. He can most likely make you up a custom recone to fit whatever you need. He's done it twice for me.

sweet. thanks jacob. to the OP. love the amp rack. what kinda electrical do you have to back up all that power?

so i should order the N-807 right? or would the N-68 do better? thanks.

speaking of "turn-off pop", what causes that. my 1500d just started to do that outa the blue a couple of weeks ago. the only thing that changed is i tested a woofer @1 ohm that i bought to make sure it worked. after that i put my normal sub in @2 ohm, now i gots the pop's.

here's the start of mine. this was several months ago. reciver is differnt now. QCS RMX850 amp pushing the substage. substage is going to be eather a custom recone from dave on a massive DMX frame and mag. OR, a pair of 10" BM's. waitin to finish with some odd's and ends. then i'll decide on what to use. here are some of the pics. more will be later when i'm done. BTW, i'm 26, and still love to tinker around with lego's from time to time. :D

i have a OZ ME10.2 i'm going to use for my HT sub. i'm wanting to incorporiate (sp?) it into a end table since i don't have one for eather coutch. if i do sub and port both pointing down, how far off the ground should i have it? i will be also going at about 1.25 cubes, what should i tune it to?

or just really freakin busy. i know me and the lady are now with 2 weeks left. by the 2 days left mark we'll be running around like a couple of chickens with they're heads cut off.

cool. thanks guys. pics will follow sometime in the next couple of weeks for my first audio related build log.

congrats. 2 more weeks to the day and that ball and chain will be round my ankle as well

this is what i have first off. then the question. HU is a Kenwood Excelon XXV-01D, comps would be a set of Illusion LM-6 mids and rainbow tweets. amps would include a orion 8002 for the mids, and a orion 2002 for the tweets. NOW, for the quetions. seeing how the HU has a pretty good x-over on it. could i use that for the prossesing and use the front pre-outs for the tweets and the rear for the mids. (HU also has sub outs too) if that wouldn't work, what kinda prossesor should i use, what what kinda settings should i have it on. thanks.

holy cow. i wish i had the room for a setup like that. how much do you think you have in it money wise?

hey everyone. i got a set of x-overs and was wondering if u can help with the settings. when i take the cap off there is a wire that goes to eather "A" or "B" plug. there is also another wire that can go to low, med, can't remeber the third one, and loud. what are all these for. thanks for your help guys.

Hello SSA, I'm new to this site, but been on CA for awhile now. (under the same name) hoping to fill my head with more usefull (and worthless) knowlage (sp?) from some of you guys. i'm also gearing up for install time later in march once the weather gets nice. so i'll be looking for more stuff round here too. is there any other faces from CA that i might know here?

10 more days till spring break means another b-day for me. god i'm gettin to be an old fart.

lawl, it's the acid. i see no postin the tranz here :D