audioman21

I actually prefer The Klarity series over karma.I have a few lenghts of both. IMO, the rca jacks on the Karma series tend to pull apart from the wire easily. The only thing I personally don't like about the klarity series is they have a wire in between the rca wires that can be used for a remote, not a bad faeture for some but I didn't need it therefore just got in the way. Overall Klarity is a good value. Back to the wire, if your on a budget the Klmx is the way to go but if your serious about car audio you might as well spend the money now on quality stuff rather than upgrading down the road. Another reason that Kollossus is more pricey is its "suppose" to have the highest strand count. i'm not saying all this from here say, Knukonceptz is the all i use from every wire down to the fuse and connectors.

thats fine if you guys want to keep it here, I like learning.

I picked up a pair of these the other day for my doors and was wondering if somebody could tell me what to set the crossover at- low pass, full, or high pass?

Klmx isn't pure copper, its an aluminum and copper mix. Kollossus is pure copper hence the higher price. When using pure copper you will have less resistance.

I haven't heard them yet but just by looks and other reviews they are stout for what they are.

I just have the one set, i was asking if I should grab another and they said no. Theres a post in this section that has an email to still get Mach 5 products.

Thanks for all the advice and help guys I really appreciate it.

I think I'm gonna order some Vifa's from that Madisound site you showed me. Final question until I get them, I'm not going for SQ but I want it to sound clean and good but what if I do four of those Vifas (2 per door) with the two Mli's(1 per door)? Would that be way too much or atleast be decent?

All would be in a door pod. I looked at tweets on Parts express, but can't figure out what good and whats not.. What about something like like in the link below, either that or similar? Parts-Express.com:

I have the two Mli's already, I was just seeing if anybody could help me come up with a nice highs set up that'll go with all the equipment I've stated. I mean I asked how to set the amps for them and I stated my plans and everyone said don't do it, so now trying to figure out what to do. Whats a good tweet to match up to my pair of mli's? oh I'm not doing a four component set up and a 8" per door I said I seen build that inspired me to do something similar in a way but heard that wasn't the way to go.

I actually got the idea from ***** *****'s Tahoe door rebuild. He has the four 6.5" components and a 8" in the front doors. I like the way his came out so i figured i'd do something kind of like that. he runs all active though. Like I said though you guys know more than me about this so I gave my budget and specifics, and i'm all ears to what mids and hi's set up you guys would think works for me. As far as the door pods, i have all the skills and tools to build those its just when it comes to speakers I've only ever worked with coaxils. Components and 6.5" mid basses are all new to me.

Since you guys are saying not to do what i was going to do how about helping me choose what mids and hi's set up to do.? The amp is an Elemental Designs Nine.4 so far i have two MLI 6.5's. My plans are fiberglassing some door pods into a coupe ( still looking for a sound car, but will be roughly a 95-97 Cutlass Supreme) For subs gonna step down from the two level four's and two ED Nine.1's to one Nine.1 and three 10's. For mids and hi's I'm looking for loud and crisp that will keep up with said woofers and then a little bit. With all that being said what would be best, should I order two more 6.5's and four tweeters or just keep it to two 6.5's and two tweeters? budget wise for tweeters i'd like to stay under a hundred for tweeters more if you guys suggest four tweeters. Thanks for the help and time reading my post.

I would stick with one Mach 5 Audio MLI-65 and one component set per door. You think two component sets per door in a coupe are too much?

Sorry for the lack of more info. All of my mids and highs will be glassed in the doors. I don't know exactly what way i'm going yet. My plans thus far were going to be one mach5 and one or two 5.25 components per door. The amp is an Elemental Designs Nine.4 Sub stage i have two DC level four 12"s with level five coils and two Elemental designs nine.1's. i was thinking about dropping down to one Nine.1 and maybe three 10's, either the SSa Dcons or the Incriminator 187's. Denim-- when you said you ran yours from 40hz up to 2200hz, what does that mean on the-- low pass, full, or high pass switch? I've never ran seperate mids like this before and am a newb on the matter.