Killerzracing71

I asked was the company still gonna be around. Marks response. No worries, Mach 5 is still around. Give me a bit of time to fix up the website a bit - then you can snag what you need. Thanks, Mark

Well I hit 140.06 on 800-900 rms ( RF T1000bd @ 2ohms) on 2 MJ18ms on the TL. BTW this was at 30hz I love low end bass, its the best, big box low tune, cant go wrong. I plan on 1k ea to them im hoping for 147-149 at the same freq. BTW this is in a caprice wagon. Get you a wagon, and get to work.

http://www.hotrodders.com/forum/alternative-lizard-skin-103610.html Micro ballons http://www.heatshield-r20.com Anyone had experience with it? It looks interesting.

Are you still going to have 4 ohm coils when the 1 & 2 ohm coils are being produced?

YEEEEEEEESSSSSSSSS I wanna see the animal.

143 @ 32hz Im only doing 140.6 @ 30hz with 800 rms (well I do have a Caprice wagon too) How did you get that edge over me LOL. I skimmed over the thread again, said something about another amp, you change them up? Mark get them things back in stock so I can get somemore

I have 2 MJ18ms and yesterday i noticed it wasnt geting low as it used too, I noticed it yesterday night around 1 am and it was freezing cold it was ice on my roof, and I had to tug at the door to open it I played songs that would shake the entire car and it just wont do it. I had to put sub out to 15 (max on my alpine) to get it to do anything like it used to I normally have it at 8 whats going on Is my amp dying or what? cant be my ears, becuse I can feel my system

Yeah thats what im getting on another forum The surrounds could be stiffer when it's cold, which would affect the resonant frequency (Fs). 11 months ago Source(s): The plastic squeeze rat on the dashboard of my truck. In cold weather it is much harder to squeeze than in warm weather. stiffens the suspension is what one dude said too so im guessing thats what it is

Pretty much same design I had LOL

I have 2 MJM 18s and they are in a 12 cube 32 hz box oriented like this okay im wondering if it will help at all like this I didnt account for the Double baffle and the 3/4 sheet under the box to get it off my wires, and make it easy to move when i need to. its about 3-4" away from the roof, and i swear all the sounds going outta the car LOL, So will that help or hurt me BTW its in this

:bigclap: KU40 You hit it dead on, Im learing about Bracing, I didnt do it on my last box for my TREO TSX, Did a double baffle on this one, help quite abit. I should be done with it this time, think I fixed all the Issues with it. Thanks for you guys support even though one apple tried to spoil the bunch, "but once the glue is set the screws don't really do much. The glue is what really holds the two pieces together." yes thats right Ive heard that before, and thats what I did........... but I didnt let it set........ too excited and wanted to get it in, thats what ended up happening plus the the drill bit issue

Yes I did, but it it hit the wrong part of board Hard to explain, but Its line dry glue where it supposed to hit the port Yeah this is my second box that I have built ever, Not like im on here talking nonsense things happend and you do have to learn by doing, and put it this way If you dont learn from your mistakes whats the sense in making them, Dude I dont have money coming out my butt, or anyone in my area to realy help me on my builds so I just dove in and did it, and Im proud of it, and so is everyone else thats heard it, Until i got on the mic and it found another part to come loose Im sure everyones build has been 100% and worked perfectly on the second go around with no help I even put that Big box in the car by myself

Unfourtunetly Its my fault, its how I did it, used too big a drill bit and they slipped out When i test fit the screws, they held in well atleast I thought Well I braced the panels thats fine, Now its the Port Its jumping up and down now I need a Horizontal brace LOL I just need to start over Rush Jobs always expose there own Flaws But Damn 95 honda you aint have to put me out like that But your right

Use some Titebond II or any other good wood glue and coat the screw, should help. Nice score btw! LOL i thought I did, It didnt get on all the wood with glue especially where the ports are, I looke again and theres a glue stain about .5 away from the port so it didnt grab it, this was def a rush box, I wanted this thing in, and i didnt let glue dry, silicone dry, or anything lol this problem is my fault Just didnt let it dry SO i reinforced it again, SH*TLoad of glue and a semi double baffle on the parts that are seperating, and i let it dry overnight

With only 800-900rms total

Big dave sure has a small car and small house, but let me stop talkin for he comes down here an Kicks my A S lol I wanna see the pics of this build thats crzy

Yeah I used the smallest one "I HAD" which I thought was fine I tested it, put the screw in and it held the wood no problem, didnt take into account that these are Sony Xplods and they actully cause Severe Vibration lol I ended up using 2lbs of drywall screws

I was playing around and hit that on Jeezy White Girl, and was using a 33hz tone, basically I stayed right in that area, So im assuming that song has that tone in it My highest score was 140.7 on a 33 or 34hz tone but that other pic was so blurry i posted that one instead I did 139.8 at around 40+hz or so I belive cant realy remeber But right after I did that, later that night my box decided to find another spot to seperate LOL, I pre drilled to deep and didnt let the screw bite as good as it possibly could and they decided to back out

Well My next box will be a wall, Im getting it miced tonight on a Tl, so ill post the numbers, but I internal braced it with 1.5" wooden dowels on each panel no more flex and added some 3" drywall screws Next setup 2 IXL 18s I realy want to try those bad

Got-damn, must be something fierce Yeah LOL it was so much Noise before I rebraced it that I cut it off, and listened to wind Noise LOL, it was more Peacfull then the system, but im gonna take car of it tommorow I just cant beleive that side panel flexes like that lol If it was an IXL omg I would be have a sale mark lol

Its just so damn close to the roof, I didnt take into account to the double baffle for one and then the subs are 3-5" away from the roof, LOL I mean its fine i guess I was seeing if that will improve anything, It hammers on Lows like a Thunderstroms coming through, and I also found a SEVERE leak, and FLex Issue today Side panel moves about 1/4" in and out, and subs jump up about 1/8th inche I didnt know MDF could flex like that :bigclap: thanks Mark for an awesome sub that can do that, And use my Dowels I was supposed to put in the box from the jump I wish I had dough for some IXLs Do a New years Sale on them LOL

Yeahh to me I got my MJ18ms installed in my wagon but I used to big of a drill bit to pre drill and now some of my screws backed out, and Now I have to Brace the Front part again but OMG Rashad was right they are some bad ARS subs I cant belive it only off 900Rms or so After I fix the flex ill be set

Barely fit inside and i dont know if you know how hard it was to pick that box up by myself and get it in the car, I was determined, and im paying for it, My back, wrist, shoulders, thighs, every part of me hurts, I cant open doors no more LOL

Get one, Join www.impalassforum.com sites down server change but keep an eye out alota B bodies and very helpful ppl but heres the box, Im gonna take pics of the Bracing, I had a Family Freind cut the wood for me, He has the yellow nova, and you see the little suburu struglin to carry that MDF lol

I realy cant do that, I need to be able to get to my amps If I need to, last panel pops up