timmc2006

i read some where that that amp is fused at 240 try that

well if i was you i would go with two 12s cause two 15s would never fit in that in there right enclosure because the 15s want 2.8cubic feet at the least for each sub

would the design i gave u not work in ur car?? not sure excatly like i said im kinda new myself

ya thats how u would cut the port. If ur gonna run 2 subs then ya it should work im not sure what ur tuning is or cubic feet kinda new myself lol but sounds good to me try to keep the sub center of the L port thats just best from what ive read ALSO u can use RE enclosure calculator might help also

heres a design i found on here made myself had to cut mine down but it works and sounds great hope this helps url=http://img2.freeimagehosting.net/image.php?bf7ddc8dc1.jpg] if that dont work heres the link http://www.soundsolutionsaudio.com/forum/i...showtopic=13817

so from 40-20 then back up find sweet spot and thats it thanks for all the info ive been trying to get some answers on this now i have em thanks for all the help cant wait to get all this tuned right getting my gains set in a couple of days at the local audio shop

first thing sorry guys ive tried posting this in the fi section didnt notice it was in the wrong place but im trying to find out the cubic feet on this box and its tunning cause i made it but in order for it to fit i had to chop it down 2 inches if anyone has any ideas or any help it would be great and its for a fi bl 15 and again sorry for the double post

ok ill try that and how would i no if it wasnt right never had to mess with any if this stuff last amp i had was 600watt jensen lol i no dont make fun

ya i wish i could have went bigger but this was the first time ive ever built anything so i guess i did good for the room i had this box takes all the space i have it takes me bout 15 minutes of twisting and turning to get in there so i got it just right one more question i heard it is good to set ur amp subsonic right above tunning does this apply to a fosgate t10001bd?? but so far i have the big 3 1/0 fosgate wiring no extra batts and stock alt lights dim like crazy with car running im getting 14.8 volts havent checked for drop yet

ok i got on re enclosure calculation site and by my measurments i got 3.018 tunned to 34.8046410782157 is this gonna be good cause i listen to nothing but rap ??

i made this box but i had to cut 2 inches of the top can anyone tell me what the tunning is

i had made this box and i had to cut 2 inches of the top for it to even fit in my trunk might be a dumb question but what is the cubic feet and the tunning im asking this cause i am now just sending my amp to get fixed cause it took me 2 months to contact the dealer who sold me this amp cause fosgate was wanting 200 to fix it and now all i gotta pay is shipping and i am just wanting to no the tuning so i no where to set my setting on my amp any ideas will help ooo and its a t1001bd thanks

i havent hooked anything up yet but i have a fosgate t1000bd and 1 fi BL 15 with dual 1 ohm and p chamber and flat wind since im hooking this up to a 1 ohm load but i hear that the 1 ohm is only .70 ohms will my amp keep up with the sub and will it be safe to do without blowing stuff ?? how many watts will the amp put out under 1 ohm any advise would be great

well just got of the phone with fosgate and its gonna cost 208 plus shipping there lol well guess i learned my lesson well thanks for all the help and what not

ya ur right it was my fault for being in a hurry but how do u reset it and if it does have to be fixed how much do u think it would cost

ok but even with the sub wires disconnected it still stays in protect ........ well i just tryed it again still no luck without speaker hooked up goes strait to protect im pretty sure i fryed it but if anyone can help or give me advise on what to do would be great

i had to wired postive side from amp on positve coil jumped to the other coil on positive and negative on the coil jumped to the other negative on the other side i cant see no burns or nothing on amp stays on protect and thats it

well i installed all my stuff today 15 bl loaded and t100bd wired at 1 ohm well i was testing everything out i drove down the road put a bass tester in then it played and was sounding really good when i started to smell something like it was burning so i pulled over and the protect light was on but u could barely see it checked all my fuses they was all good the fan on the amp was on for about 5 minutes and now it wont work at all i took it apart and i dont see any damage or burnt stuff was is the problem here

i was thinking about trying to do it myself but i have no idea how to make it sound right and which way would be best like sub facing upwards ports back and i have no idea how to tune it or anything i never made a box before hope some one can help thanks

can anyone help with a box design for my car im gonna be running a t100bd and a Fi Bl loaded and at 1ohm ideas or advice would help alot thanks

my bad its a 15 and the opening is 20 high and 35 wide inside is 38 wide and 20 high and around 47 long hope that help

isnt it 1000 at 1 ohm? the birth sheet for it i have says 1475 watts at 1 ohm and 1075 at 2 ohms ya i didnt think it was underrated that bad but i guess it is

so it would kinda risky to wire to 1 ohm since the sub is actually .70 omhs? And say if i wired to 1 ohm what do u think would be the biggest problem i could run into sorry for all the questions just gathering info cause this really where ive been learning

i just got my sub in this evening and i went with a fosgate t100bd heard alot of good things about this amp plus i paid 409 shipped cant beat that for a really good amp which will do 1500 at 1 ohm sounds like something u should look into

Some cars have a batt-engine block connection stead of chassis to engine block... what does this mean cause i cant find a ground coming from my engine but there is a ground from my negative side of my battery to the body then to the motor mount why is it like that?? any idea would be great and if it would help it is a 02 nissan sentra