NDMstang65

Not feasible honestly, you'll have as much money in shipping then you would in the woofers....

Need more info then that... How much room are you working with, how much power? etc.

Your unloading the woofer playing below tuning frequency of the port. Few things you can do, either lower the tuning of your enclosure, don't play that music, or pick up a set of harrison labs f-mod's It's not the woofers fault or an issue with the woofer, it's a simple tuning issue... Thanks! -Nick

Honestly don't think you are ready for a BTL, you must consider all of the electrical upgrades and everything else that is going to go along with the woofer. Figure using on multiple runs of 1/0 cable, high output alternator, multiple batteries etc... Might want to think long and hard about that

Via UPS it will be an additional $241 for shipping alone to get to you..now with this you get a tracking number and everything. If you want to ship via USPS it will be an additional $205.48, but with this you get no tracking number or anything. Once we would mail it this way and it leaves our facility we will forward you the shipping documents and after that it is your baby. If the post office looses it then that's not our problem. We've had WAY too many packages get lost going to Canada using this method... Thanks! -Nick

No we're not going to fool with it..they have like a 2.990" coil or something really off the wall odd ball stuff.. We're definitely not going to try to machine the motor out, you'd have ~200 bucks in labor and another 100 bucks in parts for a woofer that simply would be sub par at best... Pretty much have a paperweight on your hands unless you send it into rockford and get another one. Otherwise put the money to another woofer!

Pretty sure i've got mine somewhat under control..but I could have looked over it. Post your question here, odds are I didn't get it...I try my best to get all emails replied to in 48 hours or less if and all possible... Just ask..i'll get you taken care of. Thanks! -Nick

That's it? I'm just wondering WHY? Does it matter? They probably don't have the parts for that VERY specific driver. That's all I was asking, if they didn't have the parts or if they don't know how to recone it. Not a woofer in the world that we don't know 'how' to recone... It's a matter of rockford using different Chinese tolerances...coils simply will not fit as they are not american standard parts (3.000") Best of luck getting a recone for it...i'd be willing to bet that they do not supply any recones at all for them. Probably just ship out new woofers

No.. Sorry man

Best bet is emailing me, haven't heard anything out of you... I simply don't have time to check PM's, I really need to turn them off... Email me..i'll get ya taken care of!! Thanks! -Nick

You couldn't audibly hear it in that scenario. Regardless, do not do it. It's a waste of time money and effort.

Yep it'l work fine.

It's a 7" driver...i've got the specs on my other computer i'll work on getting them to you tomorrow. Thanks! -Nick

750-800 watts is fine!

Not exactly that easy..if it was it'd be up now.

New site is done..just not loaded yet!

I disagree with that.. I'll prove my point later, but it involves accelerometers and proving that clipping (square wave form) in and of it self does blow speakers. Think about it..your going full boogie forward with no transition in the wave form where it normally rounds over in a sine wave, your going forward 300 miles per hour and immediately stop and slam in the other direction, in those few milliseconds there is heat build up and inertia that nobody has yet to account for. Over time, it will blow it. Whether it be thermally, or mechanically. Thermally it will pop it on the coil where the wire turns up to go to the tinsel leads...mechanically is obvious at that point. I'll prove it soon when i've got time in the labs to do the testing with the signal generators and accelerometers... But i've gotta be able to focus on just a few things first instead of 12 like I am right now.

I'd angle it the same as the windshield is..

Just off set it.. Fiberglass the rings off set from the manifold itself, instead of centered...say 2-3" however far it would need to be

Don't need parameters Don't put them in a sealed box Follow the box guidelines in the technical section...and you'll be fine.

Top secret They all have personal meanings to us in one way or another...and reflect our lives / personality of sorts...

Still 1.5 weeks or so out on the magnets...so 5-7 days or so after that??

Now ladies, if we can't play nice i will be handing out vacation tickets to anywhere but here. I will not tolerate this. I don't care what you know or don't know or what you think you might know. Bottom line is you are wrong, DO NOT MIX SUBWOOFERS. I've got more important stuff to do than to go through and edit these posts. Regards, Nick

Make rings and/or a little "box" of sorts so it acts like a manifold. Then let it hang down from there..

It's pronounced 'Figh', If it were to be pronounced 'Eff Eye' both letters would be capitalized, they are not. Way off on the name lol... Societal System Discontrol