NDMstang65

Hahaha

Send it in we'll take a look at it..honestly man i've never seen one fail like that with 900 watts...considering it has 4 spiders on it its kind of hard to do . Make sure you put your name, address, email address, phone number on a piece of paper in with the woofer. Send it to: Fi Car Audio RMA: 1242007 5480 Cameron St #107 Las Vegas NV 89118 Write the RMA number on the outside of the box with a sharpie. We'll take a look at it and see what happened, if it's covered under warranty we'll rebuild it for you and get it back out ASAP. Thanks! -Nick

Customs can be terrible this time of year... Has the tracking info been updated?

Sorry man, can't help ya...you've got some nice paperweights though

Don't think we can recone it man, has to be a 3" coil...

As far as i know from checking with Scott the BTL 18 was ordered as fully loaded and the 15 was ordered as a 2 slug with cooling... Hope that helps -Nick

www.powermastermotorsports.com

Too much power man, if you use your head you'll be ok, but i'm giving you fair warning . Thanks!

I'm not joking. Buzz Lightyear.

Buzz Lightyear.

We're not machining adapters anymore, if you want it done you have to send the motors in to be machined for our baskets...otherwise you have to use TC's baskets until we get 10" spiders and stuff to fit them... Thanks!

Nope, gotta go to JL.

Generally speaking in IB cone area is king... Honestly man you may be able to put a pair of Q 12's in the baffle you have now...1kw is MORE then ample to get them to full stroke for the pair

Don't do that. What kind of voltage is your deck putting out on the RCA's? Gains are meant to be matched to the RCA input voltage, not output voltage on the rails. Odds are you are going to turn the gains too high and burn something up....

Nothing i can do man Scott is out of town for the holiday..

if that uses the same size spider that the eclipse ti uses, do you guys now have something that will fit? i still have my pair of blown ti's sitting here, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee Scott is supposed to be getting some 10" spiders in to fit TC's stuff because of the wealth of people that have been asking for recones... But we're all MIA for thanksgiving, just browsing a minute before we eat our first meal of the day

Looks Chinese... Measure the gap, if it is a standard 3.000" coil then we can probably do something..otherwise sorry. Thanks!

If you have a 1 cubic foot box then your port should be anywhere from 12 to 16 square inches in cross sectional area... So 12 square inches would be a port 3" by 4", a 16 Square inch port would be 4" by 4". Just multiply them accordingly to the enclosure size that you intend on using... Thanks!

If subsonics are not set up properly and you beat the piss out of it under tuning with a high current amp odds are you will kill it... If you don't do that then you won't have any problems. Thanks!

Little high on the frequency range... But the SSD with a copper coil should fit the bill nicely. Thanks!

Doubt seriously if you are going to fit 18's and everything else in the cargo area...

Tis ok mr webster, i still loves you. Only on tuesdays though hahaha.

I told you simplicity is key

Closed on the weekends man, it's sunday .

Ahhh ok I understand about putting subs in alone, i've loaded a couple of the old team rf's from way back when You should be able to take them out one at a time now that you have them mounted and pull the gasket back...so you don't see them. Your call boss Post up some video's!!!