NDMstang65

That's why we do not make a BTL 10 and why 10s have horrible cone geometry issues. That's how the parts work, you have to stretch the surround down to the basket.

You haven't a clue what is going on and the supply side issues that we have had that are 100% totally outside of our control. We have tried to release it, but every time it is ready and things are ready to roll something else happens on the supply side of things and we can not get our hands on raw materials, so the materials that we have had for it, have been used for other things. If we would have spent the extra week to pull the t/s parameters off of your woofers you would have freaked out because it "took too long". We are not going to make a brand available, until it is ready to be available. If you do not approve of that, then I am sorry. I bid you farewell and best wishes to your endeavors.

No..just not right now. It makes no sense to release another brand when it is not possible to make more hours in the day to produce it. When things are more stable it will be released and ready to go, now is just not the time for it .

Simply do not have time to release it and make time to produce them.

It's going to be hard pressed to beat picking up wilwood stuff..it's priced fair considering the amount of time you will have in piecing your own together. The other thing you got to think about is will your calipers clear the inside of the rims with the larger rotors. You've got larger tires on the XJ right? I know my heep is a joke with stopping the 35's.

Got it under control

Just emailed you back..stay awaaaaaaay from the t-line. Bad idea man.

I suggest 2 cubes sealed personally.

board meeting = planking?

SX's always had a flat wound in them..still use the same coil today. I wouldn't suggest 1200 watts, it is really a 1000 watt sub because it has no cooling. Sorry but we do not ship shims, business cards, manilla folders work fine.

Totally said to my monitor..'shit..what now' well played sir. well played.

I'd go 2 cubes sealed and tune at 45Hz

Speakers do not 'put out' wattage. They take electrical energy and convert it to acoustical output..or sound. For a 900 watt amp...look into a SSD with cooling. I would not pour money into a N2 when you do not need it.

You would want to select the HQTS option as it is optimized for sealed. It takes out extra material out of the inside of the motor to tame things down to make a bit more of a linear response instead of having a peak due to un-necessary motor force. 50Hz crossover point should be great and you should have no issues using your current enclosure. It should be significantly louder, and you will run out of surround before you bottom the woofer out .

No just the soft parts, if you want glue you can get it in the accessories tab on the website.

We only use one coil in the SX recones ..you'll get the same thing.

I've definitely emailed you back because I remember saying that I do not know what the parameters will be. We do not take the time to read the parameters for a recone for another manufacture's equipment..the point of the recone is that it works and preforms well. The SX recone is made for the SX, it uses the original coil that was made for the SX. We would not sell a recone for it if it had to be sent in. Aside from that, we can not machine a motor once it has been magnetized.

Most likely, yes.

Cheapest route is going to be just reconing one to an 18..unless you wanted an SP4

https://ssl.perfora.net/www.ficaraudio.com/sess/utn;jsessionid=154eca51dad1811/shopdata/0050_Speakers/product_overview.shopscript

Fidelity.."accuracy; exactness:"

No it is a typo, they are both 1500 watts. The website is being redone.

Better turn it back on before you snap the surround off of the sub and yank the tinsels out of the spiders...giving you fair warning unless you want to buy stock in recones

Your tracking number is sent via UPS Quantum View and looks like 1Z and goes from there..

No. The incredible goop.