NDMstang65

Can't do anything until after SBN..

BTL 12

It can be rebuilt...not totally sure what Scott charges for that, as i've never quoted a price for one before... We can do it after SBN. Thanks! -Nick

Actually it does make a difference..more motor strength, it'l handle more power then the standard coil. Generally speaking is louder on the mic as well..

I don't know if it can be done or not, i know nothing about that motor. If it's a standard 3" coil, then sure. If not, then generally speaking no. Fair enough?

How much room do you have per side say if you did a sealed pair of 10's? Like SSD's with copper coil? Thanks! -Nick

prawpuh.

Kicker zx1500...Sundown 1500 are both solid amps for the SSD's! Thanks! -Nick

250 amp fuse works fine... Thanks! -Nick

Sweet!

Ok found it...i'll try to get ahold of Scott today..i don't have any way of really getting in touch with him since my pda broke yesterday... Thanks! -Nick

Your playing way below tuning frequency, you need to turn your subsonic filter 3-4Hz below your port tuning frequency. Thanks! -Nick

Then your looking for an amp that'l do 2kw at 1ohm...plenty out there . Thanks! -Nick

The stock Q will be fine with that amp, so long as you are mindful of the volume knob and the gains. Thanks! -Nick

You all are missing the point...as far as the graphical data goes. We rate the BTL's at 2kw for a reason, a big reason, in industry terms it's the DAF. Little hint, Meade runs 4kw a woofer..and under his control..is no issue. If your an idiot about it yes you'll break them at that kind of power level. Thus is why we have the bp power option for the Q, 1kw is about on par for what it needs to have, after about 1200 watts things start to get hairy, which is where the option comes in to play...2kw for the BTL..well that might be quite a bit more conservative than that of the Q. But we rate them so any person should have zero issues with them at all. Hope this helps... Thanks! -Nick

All depends on how much power your amp puts out...if it does over what we recommend RMS wise then it would be a smart decision to get the bp power option. Thanks! -Nick

I believe it's 35 to re-center a motor, Ballpark figure off the top of my head is ~95ish plus shipping back to you..i don't have a price sheet where i am right now. Thanks! -Nick

Never said it wouldn't work, simply said you will not get them to their full potential. But sure, it will work fine. Thanks! -Nick

Did you do what i told you to do? Thanks! -Nick

Glad you like them! Keep us updated on the long run... Thanks! -Nick

Awesome, Thanks! -Nick

Honestly the only way you are going to get loud is hundreds of hours of testing...the sealed box thing really does not work, because once you get the bigger enclosure in there all of the acoustical properties has changed... Only thing i can really tell you to do is build as big as you can, you can always make the enclosure smaller, but making it bigger becomes a problem...tune high with a substantial amount of vent area, start testing and choke vent area or tune lower and cut down on box volume until you peak... Thanks! -Nick

You may see me browsing but i'm not going to have time to post i'm not ignoring you, i've got the wake tonight and the funeral tomorrow and after that it's work on the truck 12 hours a day... I will be slow to reply to emails because i will be up and down the road all week...just have patience Thanks -Nick

Looks good man...we'll all be at SBN...stop by the booth! Thanks! -Nick

What's your zip code? Thanks! -Nick