jaynanspl

Hey Guys!! I know its been alittle while for an update.. Was able to get a new alpine 9857 deck for $80.00.. Decided to make a small vid to see what the flex would be like.. Man tones in the 20's and 30's are wicked.. I know I have along way to go to get the other subs and lots more power, but as it is right now this thing is loud as shit.. I have sat in the back seat right in the middle with my head in front of the port to give me the feel of what my friends will feel.. I know its not as good as it should be, but after talking with Mike late week he told me this... when you add the other woofers it should pickup on the high notes good. Your reactive is high right now (really high) due to each woofer in 2 cubes sealed (that is what I usually give an 18 lol) For the time being just know that your amps are rising to prob. close to 6-8 ohms so they are making almost no power. Rise will go way down when you add the other woofers.

Well guys, got some work done today.. Thought I would put the panels in place add some spray foam to seal it up and keep all sound forward.. I know its not to great looking, but I will make sure it wont look like that when final.. Then I thought, what the hell lets make a battery box for the rear of the beast while the foam is drying.. Sorry about the sun glare.. With the tailgate down. Tailgate up.. Like a glove..

Got alittle more work done today.. Jay

Got a chance today after the movies with the wife to work on Bubbazorus!!! Nothing to fancy, just some side panels.. Front shot from the windshield.. Not to bad for really being my first try on making them.. Jay

The ported section is tuned to 39hz.. I want the lows to be real low..

Just thought I would post a sample vid using my wifes camera just check the quality.. I know its not the test you guys are wanting.. Maybe this weekend I can get the wife to record while I do a test.. I also need your guys help.. When the wife gets back to work I will start getting more stuff for this, but I will really need to lift the rear cause of the added weight.. Where is the best place to get the helpersprings or bags? Jay

Update Time!! Got some done, not alot but its something..

Well guys Im hoping soon I can get a new vid without people wanting to call the cops on me .. I cant believe what im in for when I will have all 12 subs in there.. Right now I have my amp gain not even a .25 way up and the bass on the cheap deck im using at like minus 2 or 3 and this shit gets nasty.. I thought my mazda with 2 18's in a wall was loud.. Jay

Hey all, hows everyone today!!! Finally had some time to work on the beast.. Port time.. This is just a trial fit.. nothing is screwdown.. With the rear seat upright..

Just a small vid update..

Well I went and put the 6 subs I have at the moment in just to get a Idea of what shes going to look like.. I must say. DAM!!!

Well I know this wont be enough of a update for some.. but this is what I got done today.. Bracing added. Started to glass the corners..

Thanks for all the great comments guys.. I took today off from working on the beast.. It was to hot today.. Jay

Did not get the bracing part done, but worked on the front on the enclosure instead...I know it looks rough in spots but only cause when i was almost done the bearing smoked up on the router bit.. Jay Resized to 86% (was 1024 x 768) - Click image to enlarge

Update Time!!!!! I wonder what this means... I took this pic to check the sub clearance in the seal side..