metso

is there such a thing as a us amps de500---ive heard of the de1000 before and i think i remember somebody selling de500's on ebay years back but they claimed they were prototypes for south america or something,,anyways i have a chance to buy it,,should i ??

Its not ebay its local. I saw it and its printed right on it de500. Second time I've seen one. One on ebay and one in my hands

help please i just got an esx 75.2,,,the good ones made by zed,,,i have a dual 2 ohm woofer that can obviouslt make a 1 ohm load or 4 ohm load,,,ive downloaded the instructions from the esx website but this little amp is so complex along with the instructions ,,, ireally dont know where to start..all i wanna do is run the amp bridged to push my woofer help please

Since the amp has a button called true mono, i wouldn't bridged the amplifier. What this button does is turn the entire amplifier into a mono block amplifier. Now to does this all you have to do is wire your sub to 4 ohm and on the amplifier press down the true mono button. (press the button before you turn on the vehicle, if you don't you will not be able to push the button while the vehicleis running.) When you wire the sub to the amp you only put the wires in the left channel. The right channel should have no wires in it. Also you would only need to have 1 rca end plug into the left channel, but it won't hurt to have both rcas connected though. Which would be better cause then you won't have an rca end hanging there that could cause interfence. In this mode the amp would put out 240watts. PS. If you ever want to sell it let me know cause i love these esx amplifiers. ok heres another question,,,the amp does 240 watts bridged at 4 ohms and 230 watts bridged/true mono at 1 ohm...............so i would have to wire my sub for 1 ohm for true mono,,,or just leave it at 4ohm and just select the bridged button on the amp? Im sorry i quickly read my book before i posted and i messed up about the 4ohm load. If you use the 4ohm load you select the sync bridging button, and if you want to use a 1ohm load then you use the true mono button. But using the 4ohm load you will have less stress on the amplifier. am i safe using 8 gauge power wire for this amp?

Since the amp has a button called true mono, i wouldn't bridged the amplifier. What this button does is turn the entire amplifier into a mono block amplifier. Now to does this all you have to do is wire your sub to 4 ohm and on the amplifier press down the true mono button. (press the button before you turn on the vehicle, if you don't you will not be able to push the button while the vehicleis running.) When you wire the sub to the amp you only put the wires in the left channel. The right channel should have no wires in it. Also you would only need to have 1 rca end plug into the left channel, but it won't hurt to have both rcas connected though. Which would be better cause then you won't have an rca end hanging there that could cause interfence. In this mode the amp would put out 240watts. PS. If you ever want to sell it let me know cause i love these esx amplifiers. ok heres another question,,,the amp does 240 watts bridged at 4 ohms and 230 watts bridged/true mono at 1 ohm...............so i would have to wire my sub for 1 ohm for true mono,,,or just leave it at 4ohm and just select the bridged button on the amp? Im sorry i quickly read my book before i posted and i messed up about the 4ohm load. If you use the 4ohm load you select the sync bridging button, and if you want to use a 1ohm load then you use the true mono button. But using the 4ohm load you will have less stress on the amplifier. perfect!!!!!!!!!!!!!!!!!

Since the amp has a button called true mono, i wouldn't bridged the amplifier. What this button does is turn the entire amplifier into a mono block amplifier. Now to does this all you have to do is wire your sub to 4 ohm and on the amplifier press down the true mono button. (press the button before you turn on the vehicle, if you don't you will not be able to push the button while the vehicleis running.) When you wire the sub to the amp you only put the wires in the left channel. The right channel should have no wires in it. Also you would only need to have 1 rca end plug into the left channel, but it won't hurt to have both rcas connected though. Which would be better cause then you won't have an rca end hanging there that could cause interfence. In this mode the amp would put out 240watts. PS. If you ever want to sell it let me know cause i love these esx amplifiers. ok heres another question,,,the amp does 240 watts bridged at 4 ohms and 230 watts bridged/true mono at 1 ohm...............so i would have to wire my sub for 1 ohm for true mono,,,or just leave it at 4ohm and just select the bridged button on the amp?

hi everyone i recently picked up a crunch ca250...it looks like it is zed made but im not really sure,,anybody know the specs on it??its also still got the hi level wires with it!!!havent seen one on ebay for years!!i got a pic but cant post it on here for some reason...i must be doing something wrong!