KiCk'Z L7

I need a new pair of rca cables. Right now i have a really cheap pair of cables on it and they finally broke can anyone tell me some good brands or something? i was looking at a pair of monster cables but im not really sure what to look for in rca cables. Thanks

I have a box in my 1995 single cab ram 1500 it does move any were. But the box is huge you have to take the seats out to get it out

I need to find out if i will need the big 3 or not with my setup. Here is what i have 1 12" kicker L7 750watts rms 2ohm dvc and am going to be purchasing a JBL GTO 1201.1 787watts at 4ohms. My car is a 95 ram 1500 and i think the alternator is 120amps will i need the big 3? information on the amp there are 3 40amp fuses so 120 amps is the most the amp will pull i was told just put that there maybe it will help you guys. THANKS! if you need more information i will try to post it up!

I need to find out if i will need the big 3 or not with my setup. Here is what i have 1 12" kicker L7 750watts rms 2ohm dvc and am going to be purchasing a JBL GTO 1201.1 787watts at 4ohms. My car is a 95 ram 1500 and i think the alternator is 120amps will i need the big 3? information on the amp there are 3 40amp fuses so 120 amps is the most the amp will pull i was told just put that there maybe it will help you guys. THANKS! if you need more information i will try to post it up!

Looking for an amp that is at least 750watts rms for a kicker L7. What brand is better Hifonics or Soundstream? The amps that i am looking at from the 2 company's SOUNDSTREAM PCA2.760 2 CHANNEL 760 WATT AMPLIFIER NEW AND HIFONICS TXi7506 750W MONO AMPLIFIER AMP TITAN TXi 7506

I have a 12" kicker l7 2ohm dvc sub needs 750watts rms i would like to get the kicker 750.1 but i cant wire it to 2ohms to get 750watts so i have to go with something like this. Also are hifonics amps any good? # No. OF CHANNELS: 2 # OUTPUT (watts):RMS @ 4 Ohms 220x2 # RMS @ 2 Ohms 380x2 # RMS @ 4 Ohm Mono 760x1 # T.H.D.: 0.02% # FREQ. RESPONSE (Hz): 10 - 30k # SIGNAL TO NOISE RATIO: >97dB # DAMPING FACTOR: >200 # INPUT SENSITVITY: 0.5 - 4.0V # CROSOVER SLOPES: 12dB # CROSSOVER FREQUENCY: High-Pass(Hz) 50 - 600 # Low-Pass(Hz) 50 - 150 # SUBWOFFER EQ: 0 - 18dB 0 # SUBWOOFER EQ FREQ. (Hz) : 40 - 120 # DIMENSIONS (INCHES): 9.5x2.5x20.0 # Fully regulated MOSFET power supplies # PWM circuitry # Tri-guard amplifier protection # IDI (Intelligent Distress Indicator) gives a visual indication of the amplifiers protection status # Platinum RCA inputs and outputs # Line Outputs # Bi-linear selectable crossovers for inputs and outputs (Hi/Full/Low) # Continuously variable high and low-pass crossovers # Variable subwoofer equalizer # Phase inversion switch (0 - 180) # OEM floating ground input # Platinum 4-gauge power connectors # Tri-mode operation # Optional Remote Bass Control (EGA-RM) # 2-YEAR WARRANTY Do these amps have alot of problems?